05-31-2012 03:40 PM - edited 03-01-2019 10:26 AM
Since 2.0.2 has come out I have experianced an issue at each install in which deleted vlans (from global database) are still showing up in the vNIC templates and therefore the vNICs of all hosts. When vlan is deleted, it is removed from vnic template as active however it still remains live until under the template, vnic interfaces tab, I manually delete the old non existing vlans. Anyone seen this ??
dave
Solved! Go to Solution.
05-31-2012 11:35 PM
Hi Dave,
I just did a quick test on my system and i see the same behaviour on 2.0.1 2.0.2 versions. i looked at the vnic running config and see the vlan still allowed on the interface as well.
I'll looks for any known bugs or will file one.
Thanks!
Abhinav
06-01-2012 12:03 AM
Hi dave,
We do already have a bug under which this behaviour is being tracked:
Here is the bug:
CSCtx65534 VLAN deletion creates orphan in service profile and traffic interuption
A side note:
this behaviour is not coming from UCS but rather coming from NXOS. we did a quick test on n5k (running nxos) and saw the same behaviour.
Thanks!
./abhinav
05-31-2012 11:35 PM
Hi Dave,
I just did a quick test on my system and i see the same behaviour on 2.0.1 2.0.2 versions. i looked at the vnic running config and see the vlan still allowed on the interface as well.
I'll looks for any known bugs or will file one.
Thanks!
Abhinav
06-01-2012 12:03 AM
Hi dave,
We do already have a bug under which this behaviour is being tracked:
Here is the bug:
CSCtx65534 VLAN deletion creates orphan in service profile and traffic interuption
A side note:
this behaviour is not coming from UCS but rather coming from NXOS. we did a quick test on n5k (running nxos) and saw the same behaviour.
Thanks!
./abhinav
06-01-2012 06:09 AM
Thanks !! Great information and glad to have it. Will relay bug id to customer and co-workers.
Dave
06-01-2012 06:14 AM
Is there a 2nd bug id for NX-OS side ? Looking for affected versions of NX-OS and dont see it on there, can you advise please since I do UCS and Nexus data center route / switch products ??
thanks
dave
06-01-2012 06:20 AM
Hi Dave,
I do not have the bug for the nxos but there are some discussions internally with the nxos team as well.
Thanks!
abhinav
11-19-2012 10:06 PM
Has this been resolved in 2.1(1a)? Looks like it from the release notes.
http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/UCS_28313.html#wp16952
11-20-2012 06:23 AM
Peter,
Yes I've confirmed this bug shows as resolved in our internal bug tracking in 2.1
Regards,
Robert
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: