Access CIMC on C210 with IExplorer 10

[fuhdan]

Hi all

I have several UCS C210 Server with a configured CIMC Interface. When I access the Servers from a local jumphost, everthing works fine.

If I access the server from my terminal Server, I don't get the login form. Just the site with the release infos.

The difference is, the from the terminal server I access the Interface trough a firewall (port 20, 443 and 2068 are open) with IExplorer 10 and  NAT.

Is there a limitation on the browser or on the NAT? Or do I have to open some more ports on the firewall?

Thanks for your help

Best Regards, Daniel

[padramas · Accepted solution]

Hello Daniel,

Can you please share screen shot of the web page when you try to access CIMC from terminal server ?

Does the system / browser have adobe flash plugin installed and working ?

Padma

[fuhdan]

Thanks Padma. The flashplayer was missing.

Without flash installed, the screen looks like this:

just install flash and you can login:

Thanks and have a nice weekend.

Cheers Daniel

[fuhdan]

But I have a further problem now.

I type in the user and password, but the browser does not go ahead. I just get the login again, without any error. After several time, i get the message:

The maximum number of user sessions has been reached.

With IExplorer 9 and FireFox I have no problem. This occures just with IExplorer 10 ...

Java and flash is enabled. I added the site to the trustet sites. Any recomendation, how to figure out, why its not working?

Cheers Daniel

[padramas]

Does CIMC web page works with Chrome or Firefox on Windows 2012 / 8 system ?

[fuhdan]

Yes with FireFox it works fine. Same TS as the IExplorer is installed.