cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
763
Views
0
Helpful
2
Replies

adding second PSU to ucs C220 M5SX

baselzind
Level 6
Level 6

i have a business edition 6000 C220 M5SX and i need to add a second PSU to it , will inserting the second PSU cause the UCS to restart or cause any sort of live service effect?

2 Accepted Solutions

Accepted Solutions

Kirk J
Cisco Employee
Cisco Employee

The power system in the C series is designed to have HA/Failover, and is hot swap.

You can add the additional PSU live.

Make sure you are adding the same voltage source (i.e. 110 for both, or 220 for both).

 

Kirk...

View solution in original post

Wes Austin
Cisco Employee
Cisco Employee

This should not cause any issues as PSU are hot swappable, however, would recommend conducting this during a maintenance window.

View solution in original post

2 Replies 2

Kirk J
Cisco Employee
Cisco Employee

The power system in the C series is designed to have HA/Failover, and is hot swap.

You can add the additional PSU live.

Make sure you are adding the same voltage source (i.e. 110 for both, or 220 for both).

 

Kirk...

Wes Austin
Cisco Employee
Cisco Employee

This should not cause any issues as PSU are hot swappable, however, would recommend conducting this during a maintenance window.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card