if I want to establish only FC connection between UCS and NetApp (don't care about NFS and CIFS right now) and want to start from beginning on the storage side, can you write down necessary commands I'll need to type to establish communication with UCS? I know there is some wizard on NetApp side but I would like to know how to do it without any additional tools/features (just like on the Cisco router: I want to know what IOS commands I need to enable particular functionality).
Do you mean connecting these two systems WITHOUT a Fibre Channel Switch (Nexus 5K/MDS, etc.)?
Thanks for doc Marcos,
it is very useful. Still, I was hoping to see something like list of commands that are mandatory on NetApp side, then that one simple command that is necessary to type on MDS switch (or whatever is needed for brand new nexus that is used to connect storage with the UCS); I remember that by default it will not work, some command about zones must be typed first.
For example, if I want to configure brand new NetApp to be used by UCS utilizing FC, I must start setup wizard first, then enter the licenses and finally start "lun setup" wizard; am I missing something for successful FC connection with UCS? For example, do I need to create aggregate and volume before starting lun setup? It will be nice to know what commands are hidden behind the two wizards... Once I have a cookbook with minimal number of commands I'll be able to search for some additional features on my own, it is important that the most basic config is working.
Similarly, for Nexus, what commands are mandatory so that FC connection between UCS and Netapp is working? Is it just about "zoneset activate name myzsname vsan 1" or I need to create myzsname zone before? Do I need to add particular members in the zone?
I will dig out a document that explains how to set this up. For your reference, it is the original FlexPod/SMT deployment guide which had MDS and an FC component (you may be able ti find it yourself). This forum event closes today, so can you please email me your contact information at firstname.lastname@example.org so I can send you the doc when I find it?
Thank you very much for your participation!
Great discussion thread, Marcos!
Seems fitting for the last day of this resource thread to highlight something brand new: FlexPod is now on iTunes! There's a brand new tech specs apps providing mobile info on Cisco UCS, Nexus & NetApp storage.