We running cisco b200 M$ blades connected to 6248 and cisco MDS. The MDS is connected to an IBM V7000 SAN (4 paths to each fabric for 8 in total) Can anyone please confirm that UCS ESXi 6.5 u1 cisco oem image should boot from either of the 2 SAN se...
Hi, In a scenario that I use only for virtualization with ESXI I would like to know if there is a better practice in QoS system class configurations and the QoS distribution for which type of nic template like management, vmotion and VM traffic. Th...
I have two servers in which I need to upgrade the firmware for- one C220 M3 and one C210 M2. Can I simply boot into the huu iso or do I need to upgrade the different components (IE CIMC, Network Adapters) separately? What is the best/ simplest way t...
Hello, i have to add a new vNIC to my ESXi Template. 1. I created a vNIC Template for the new vNIC 2. I want to add the vNIC to my Service Template. By clicking ok i get the following warning message This will trigger PCIe re-provisioning of vN...
User member of LDAP Group with aaa and admin roles on UCSM is getting read-only permissions .
Hi; I am doing Lab now a days with rack.rentals . In 3.7 section, Boot from SAN, I faced difficulty even I have full solution how to do that task. Actually, I got same flogi from both ends towards target : JBOD. Unfortunately, it booted from serv...
On Tuesday we got pink scree of death on our ESXi host. We tried consoling into the host and it rebooted with this pink screen below. Could someone tell me how to figure out whats happened or how to read this? Thanks Model: UCSC-C240-M45SX ESXi 5....
Hi Team, We have 2 units of UCS-FI-6332 (UCS 6332 IRU Fabric Interconnect/32 QSFP+ports/8p Lic) and MDS 9148. We are trying to configure FI interface as a FC port to connect with MDS but we are unable to configure FI port as a FC port. I think i am...
Hi, I am trying to export, and then import Bios profile from UCS 240 to UCS 240. I created Hardware Bios policy, but can't directly apply it to the other server due to me not having advanced license. No worries - There is export button, which gives...
All, I have a couple of UCS C220 M3S running on cimc v2.0(6d) that upon keying in the user id and password, there is a spinning wheel that takes at least 20-30 mins to login, I am guessing it is a flash update issue with modern browsers, but I have...
HiI have a Cisco C200 M3 with Raid 1 and the writing performance is greater than with a Raid 5 Next I copy the capture of a RAID 1 with 2 x SATA 1TB disks to 7.2k Next I copy the capture of a RAID 5 with 3 SAS 10K disks. In Raid 5 the rea...
Hello, we have a service profile for our esxi host that contains a local disk configuration RAID0. But we are not using the disk because of boot from san. I wan´t to remove the disk configuration to physicaly remove the disks from the blade. Is t...
Looking for the UCS 3.2 XML Schema. The latest version i can locate is 3.1. Anyone know where the 3.2 can be found? https://communities.cisco.com/docs/DOC-36350 Thank You, Dan
I need to move a server between organizations and then to a new service profile but I can not lose the installation of S.O that is on local disk, in local disk policies there is a option to protect configuration, would this configuration be?
In a scenario in which I have I have associated a vHBA to a VSAN with multiple interfaces and also associated with a ping group, in case of failurewill the repining be done to another interface of the same VSAN or due to the ping group configuration ...
