I got b200M3 profile installed with esxi 6.7. I want to unassgen the profile to b200M4. Are there any issues with this? If it boots up I can do cleanup of drivers or update them while i upgrade to 7.0. Idea is save time and not recreate new service ...
Forum Posts
Hi,we need to chage the IP of UCS Central due to some conflict, but the UCS Manager is regsiterd in UCS Central using IP, how can we register with UCS Central FQDN without unregistering it?
Hello,We have a number of Cisco UCS M4s which we no longer have hardware support for, however there are some legacy applciations running on them, so we need to keep them running for the foreseeable future. We are currently running 3.2(3c) on the Infr...
Resolved! UCS FI 6332 Unable to login.
Hello Community!I have a cluster of FI 6332 System version: 4.0(4n): A: UP, SUBORDINATEB: UP, PRIMARY And I have an error trying to ssh primary B or vip ip: Unable to login. You have reached the maximum allowed number of concurrent sessions. Please ...
Hi I am beginner with UCS. I just began to review UCS documents and watch some video. but i still has some confusion on it. After all connetions in UCS are completed, we are going to migrate host servers to UCS servers. My question is how we can migr...
Hi Experts,I have situation as below:I bought 2 rack UCS C220 M7 and FI 6400 and UCS Manager Version 4.2 and then install VMware host, vCenter. Some hosts, I migrated it from old system.But vCenter told me some warnings as: Could you help share some ...
Hello.Updated UCS 5108 from version 2.2 to 3.2. Why hasn't it been updated, let's skip this question.The update process was successful, but an error appeared in the UI - "Adapter 1 in server 1/1 has unidentified FRU".Found this article - https://www....
Have a customer that wants to connect their NetApp AFF150 to their 6300. The NetApp only supports 10GbE, is it possible to use a CVR-QSFP-SFP10G adapter on the FI side and set the port to 10GbE and it function ok? Having a hard time finding clear ...
For unknown reasons, a blade in a slot has become status "Needs Resolution" with the UCSM errors shown below. Hardware is no longer on SmartNet support, can't call in a new case. N20-C6508UCS B200 M4 Warning is being raised and cleared every 20 minu...
Dear Experts,As title, I have question about CIMC of server after it associated to UCSM, Is it possible access CIMC ?And in my case, I can not see any IP of CIMC in UCSM.(I am using UCS C series , UCSM v4.3)Thank you in advance !
Resolved! Fabric Interconnect add vlan cli
HI have a Fabric Interconnect version 3.1(2b) and I would like to add a vlan via cli, how can I do this task. Thanks.
Resolved! Set P-SATA via Powertools?
Trying to automate the creation of BIOS policies in our environment, I've been able to set everything via powertools with the exception of setting P-SATA to AHCI. Anyone know if among the dozens of Set-UcsBois commandlets there is a way to enable tha...
Can someone help me in locating the serial number of an SD card in a Cisco UCS Server (UCSB-B200-M4)? I am aware that there are two SD cards in a UCS server, and although I can obtain the serial numbers of both SD cards in Cisco CCW-R, I cannot find ...
I created this advisory because there is no central public Cisco Advisory page with all the information users would want (yet).https://www.reddit.com/r/CiscoUCS/comments/160scwg/cisco_ucs_m5m6_downfall_cve202240982_advisory/I will expand it as I get ...
Hello.We have a blade server UCS with firmware 2.2, don’t ask how it happened.We want to upgrade to 4.x, what is the best and correct way for us to do it?It is possible to update to a version where you can enter the UСS manager not through Java, but ...
