I could access KVM NAT IP in the past when downloading kvm.zip from UCSM 2.x (java based) but now with UCSM 4.x I cannot. When I browse using KVM direct WEB page, it failed when using NAT IP. Is there any workaround or solution to this? thank you
I could access KVM NAT IP in the past when downloading kvm.zip from UCSM 2.x (java based) but now with UCSM 4.x I cannot. When I browse using KVM direct WEB page, it failed when using NAT IP. Is there any workaround or solution to this? thank you
Our organisation standard is to align the UCS Service Profile name with the VMware ESXi hostname. This gives us various advantages insofar as we can do consistency check, the CI in our CMDB and monitoring aligns.The only place I cannot do this, is Hy...
I am searching for an option to attach ISO file from remote file share to UCS KVM console so that I can use it to install an operating system. After activating virtual devices in the KVM console, I'm only able to attach ISO file only from the local m...
just noticed a critical error in a clients UCS-Manager. "[FSM:FAILED]: keyring configuration(FSM:sam:dme:PkiEpUpdateEp). Remote-Invocation-Error: Failed to copy certstore (rsync failed)" unlucky - it is not documented in https://www.cisco.com/c/en/us...
Greeting We have 1 Cisco UCS Chassis 5108, with (4) M5 blade servers. and working fine I recently added 1 more chassis identical in specifications, currently the second Chassis getting error in power issue like fan inoperable #5,6. as quick action I...
error message we are seeing is "check if power allocation to server." we have 3 out of 4 functional psu's and only 4 blades in the chassis. why is 1 blade unable to power on - is there a policy setting somewhere?
Hello,I had an FI fail while in the middle of an upgrade via UCS Central. The FI rebooted and just refused to come back online, so it was replaced. The issue now is that I cannot get the FI to register properly with UCS Central. The FI is properly pa...
UCS Manager 4.2(2a)blade: B200 M4Host firmware: 4.2.2cBrowser: Chrome 110.0.5481.96I keep getting this error with a mapped ISO: Virtual Media has terminated as a result of the network, connection has been dropped.Anyone have an idea what causes this ...
I'm trying to configure our UCS domain to send syslog messages to our syslog server but somehow I can't get it to send any logs. For testing I made two SSH connections to the FI. On the first ssh session I run:ethanalyzer local interface mgmt capture...
Hello Folks, I met a strange setup for a LAN Cloud in UCS Manager (3.2.3k) There is a production VLAN with the same name and the same ID, which has been definied both in "Dual Mode", and also in "Fabric A" in the LAN Cloud (don't ask why ) - What wi...
The results from a recent pre-upgrade check are reporting that the "Safeshut Workaround" is "Needed." The comment is, "Contact TAC". I did some research, but I cannot find any substantive information at the Cisco site or elsewhere. I resorted to read...
I am currently managing at three chassis UCS 4.1 environment. I have 18 B220M5 servers that are all configured as VMware 6.7 ESXi hosts and they are all configured with Flexflash SD boot disks. We are moving to VMware 7.0 and that requires me to move...
Hello,I am trying to create a lab, that is going to use two of the 8 blades on a chassis (5108), lab blades B200 m3. The other 6 blades are being used for production. The production has it's own Tagile storage array for VSphere. The lab will probably...
I've configured boot from SAN on UCS with both iSCSI and FC a number of times, but either I'm getting rusty or something has changed. UCS cluster is running 4.1. I have two older M4 blades that I'm trying to boot from a Nimble iSCSI SAN. After cre...
Hey guys So this is my first time working with blades. I was told the chassis has an IP already and whenever I enter it into my search bar it errors out and will not connect. I have my chassis connected to a switch through fabric and can putty into t...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM | ||
02-20-2024 12:52 PM | ||
02-20-2024 10:04 AM | ||
02-14-2024 11:29 AM |