Hello,I would like to update our server usc m4 from GUI and not from ISO boot media. I found that i can do that by following:However, I cannot find the .bin for Bios or BMC in (ucs-c220m4-huu-4.1.2m.iso). How do i download them ?
Forum Posts
Resolved! UCS FC Port-Channel with Broade SAN SW
Hi All Can UCS FI(6454) end host mode use FC port to connect to Broade SAN SW(ds-6520b) and do port channels on both sides?
Resolved! Can my FIs support : UCSB-EX-M4-1
Hi,I'm having 5 blades on older UCSM and I want to move it to a newer UCSM/FI1st question:According to my UCSM/FI version [screenshot attached], can I move this kind of server to it :UCSB-EX-M4-12nd questions (** update : it's the most important ques...
Resolved! About SAN topology
Hi All, I have two questions:I have two FI-6454, each with two FC uplinks,1. As far as I know, a vHBA of a UCS Blade map to an FC uplink?2. If I want to setup the current two FC Uplinks into port channels, will it cause a disconnection? Thanks.
Greetings, thanks for reading. I have NetApp storage attached to Nexus 5k for the FCoE zoning and SAN boot and then to ACI.We simply removed those connections to the 5k and instead directly attached to the Fabric Interconnects and went from twinax to...
Hello,I am running cisco UCSM package version 4.2(3d), I joined 2 C240M4L both running 4.4.0.2f for the BIOS and 4.0(2I) for the CIMC firmware trying to upgrade to 4.1(2k). both were discovered successfully, however when I applied the service profile...
Hi,I currently have a Cisco UCS-M6-MLB server in standalone mode. We need to convert it to UCS managed mode without losing any data or downtime.What would be the best possible approach and the UCS manager version recommended.Thanks.
Greetings,We have a situation where the modules of our FI are offline, however the fixed modules are working as expected:Mod Ports Module-Type Model Status --- ----- --------------------------------- -----------...
We have UCS B M5/M6 Series with UCS Manager 4.2(1) with PowerShell Module 3.0.4.4.Earlier with Java, able to launch the KVM Console [ Get-UcsBlade -Name Name | Start-UcsKvmSession ], watch the OS installation via PXE boot on each blade with respectiv...
Resolved! Is the UCS affected by CVE-2024-20253
Good day, I read about this vulnerability: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cucm-rce-bWNzQcUm Is the UCS 5108 Manager running the firmware package 4.2(3e)A affected? If so, whats the firmware vers...
I have one IO module 2208XP connected to chassis 5108. It is connected to a FI 6400 series with 4.2(1i) firmware. When it was connected, the IO module is showing Identifying, and then Auto Upgrade, after that the IO module is rebooted. When it was up...
I am told that the UCS-M2-HWRAID only supports RAID1 and JBOD.I have a single SSD, so I would like to configure as a JBOD.The documentation to configure RAID1 on the UCS-M2-HWRAID appears to be straight-forward.However, I can't find documentation for...
Unable to login to UCSM GUI. CLI is working fine. Getting the error - Login Error: Failed to get max http user sessions. Please suggest if this is a bug and any fix.
I just wanted to clean up * decommissioned and * physically removed blade servers by * selecting one and pressing ["Delete"] at the bottom as usual from the inventory. But UCSM fails: "Operation is not permitted" Any Idea how to overcome this?
We recently deployed UCSC 2.0(1t) to evaluate as we haven't been satisfied with Intersight up to this point. I recall seeing some information while evaluating that "Some features require a valid license after the evaluation period" (or something to t...
