What are the things that we should watch out for when migrating from UCS Central to Intersight using IMM Transition tool? What happens to UCS Central or UCSM after the transition? Can it still be used? What happens when the tool fails?
Forum Posts
recently just installed brand new UCSX-210C-M7-U & UCSX-440P blades into a new 9508 chassis. Issue is that the devices themselves do not have a physical service tag to identify the a specific blade. there is a QR code at the top of each blade to sca...
Hello,I have a Cisco UCS C220 M3, and I am trying to access CIMC. I am aware that for this version, I need Adobe Flash and Java. However, the only modern browser that still supports Java is Internet Explorer, but that doesn't support flash. Could som...
Do we have any migration guide to Cisco UCS 6536 from 6200 Series Fabric interconnect
Int for mgmt is x.x.225.0/24InBand mgmt is x.x.226.0/24UCS Manager 4.2- The default IP pool ext.mgmt is not configured with any IP addresses.- Pool KVM-InBand is configured.- In LAN cloud > Global Policies, inband profile is configured to use the KVM...
I have a number of C240 M3 servers in my lab. Since flash was depricated some time ago, management of these was still possible via the CLI, but it certainly wasn't as easy. There is now a flash based browser that has been published that can be use...
For UCSX 9508, can Fabric Interconnect 6454 be in UMM mode or does it need to be in IMM mode? Can it use both 9508 and 5108 at the same time to support M5, M6, and M7?
How many cable connections should there be when connecting Fabric Interconnect 6454 to 9508 and 5108 at 100GB? What about connecting just Fabric Interconnect 6454 to 5108 at 100GB? How many cables should there be? What determines the number of cable...
Anyone have a part number for the screws that secure the M.2 SSD to the Mini Storage Controller (UCS-M2-HWRAID)?I'm not sure what the size is, maybe M2 x 4 mm?Thanks in advance.
Hi All, Please provide me your suggestions., recently we had a Esxi unexpected reboots, after an investigation we found Firmware on UCSx upgraded. 1. Will the F/w automatically upgraded? and hosts will reboot automatically? 2. How can we disable thes...
Hi! I'm having a hard time understanding the difference between the "FCoE uplink" and "Unified uplink (Ethernet uplink + FCoE uplink) on Fabric Interconnect. As I understand, FCoE can handle both Ethernet and FC traffic. Then what's the purpose of th...
Hi Team,I need a clarification on M2 HW raid configuration. I have a blade with already Installed ESXi on SSD Drives with M2 HW raid with storage profile configuration. I was trying to disassociate the profile and try with the different template with...
Hello,we are looking at the M6 and M7 servers at the moment to do a lifecycle of some of our C240 SFF M5 servers.On the pictures I have seen of the new server generations it looks like the disk trays are similar to the M5 type.Does anyone can confirm...
Resolved! Fabric Evacuation in IMM
We have a few domains of 6536 FIs managed by Intersight. We want to move the FIs in one of our domains in the rack, which will cause a brief outage. I think that enabling fabric evacuation before shutting down an FI before moving it would be the wa...
Hello,My customer recently has a problem with an IOM module on the right of a UCS Blade Chassis.When my customer issue the command "show chassis environment iom", all other status of the result is operable, the io1 is operable, except the overall sta...
