I need to re-purpose a pair of FI's and blade servers. I am considering doing a factory re-set and rebuilding UCSM pools, templates, service profiles etc....If I do this will the applied port licenses be lost? The individual who applied the license i...
Forum Posts
Hi;While connecting Fabric Extenders (like Cisco Nexus 2k) to the Fiber Interconnect, is it sufficient to attach cables to the devices and then set the ports as "Server port" on FI or other configuration should be done?I'm using UCSPE 3.2(3e) which s...
Resolved! Sound Card for cisco UCS C-Series
Hello, Anyone know if cisco C-Series can have the option to add a sound card? i have a requirement for one of my customers that they need sound card installed on the UCS Server. Amer
I just received a new UCS c220 with a seperate LSI 9266 MegaRaid card. I have installed the card adn connected the SAS cables and BBU. When I start the server it doesn't recogize the card. If go into CIMC the card is not listed. I have changed the...
So I got a hand me down UCS-C22-M3 with 96Gb ram, dual 8 core processors, and 8 300Gb hard drives. It won't run ESX because it only has software RAID. You can't even see the hard drives to boot from them during startup. Software RAID sees the drives ...
I don't manage this system directly, but I'm involved in a project where we have a few C220 M5 with a VIC 1457 mLOM adapter installed.The settings for the "External adapters" is greyed out, and my theory at the moment is that the server has a "defaul...
Configuring Storage Node failed with 'Configure networking script generated an exception: 10.226.95.64, 10.226.91.104, 10.226.91.108 is reachable. Please check for duplicate IP addresses and retry.'
Resolved! UCS B200 M5 - ESXi/HBA FNIC issue
Hello, I'm setting up a new UCS chassis with some B200M5 blades VIC1440.Connecting these blades for boot on san on VNX backend worked with no issue and setup of esxi 6.5 worked perfectly. Just facing right now an issue for connecting those blades to ...
does anyone know a simple way to export server inventory into a .csv file?ssh# show server versionmy goal is to have a easy to ready csv file with running firmware versionswe dont have intersight show server versionServer 1/1:CIMC:Running-Vers: 3.1(...
Hello all, I am trying to install a new out-of-box Hyperflex cluster using installer 3.0.1e and UCSM v3.2.3h on four HXAF240c M5SX nodes. The configuration step seems to have gone OK so far, but it seems to be stalled at 'Configuring HX server', 'Con...
I currently have the primary and secondary DNS servers defined in Unity. I'm wondering if there is a way to set a tertiary DNS server. Has anyone found a way to set a third DNS server? For example something like this:set network dns primary X.X.X.Xse...
Resolved! UCS FW upgrade from 2.2(6e) to 3.1
I am new to managing UCS so being as cautious as possible with the prep work. Currently looking to upgrade our UCS infrastructure, B and C-series blades from 2.2(6e) to 3.1(x). I am a little confused about if I need to upgrade everything to 2.2(8) fi...
whenever I start a KVM session it terminates with the below message :" Client has been shut down as a result of the network connection has been dropped. " have anyone seen this before
Hello, I created a Service Profile in UCS Central and tried to associated it with a server but I get an error that says: -There are not enough resources overall. - Resource ownership conflict. Does some one has an idea of what it could be? Regard...
Hi, i'm trying to upgarde our Cisco BE6000 ESXi 5.5.0 (C220-M4) with an Cisco Custom ESXi 6.5.0 iso, but the install alwayys stuck on the Disk Details of the RAID5 Volume (UCSC-MRAID-12G) (Automatically shown after the Gathering Information of loca...
