Hi Everybody. I need to do an upgrade on the UCS platform to my client. The platform has the version 2.2 and I will install the version 3.2. My question is: Do I need to pass through all versions since 2.2 to 3.2 or there is a base version that I...
Forum Posts
Dear Cisco Community, i've tried to study the Cisco C220 M4 datasheet but I'm still not sure if it's possible to install 4 SATA 7.2K LFF HDD on a Cisco UCS C220 M4L without installing any Raid/HBA controller, using the integrated Intel Wellsburg PCH...
Resolved! UCS C210M2 failed drive
Hi, I have a C210M2 UCS server in a RAID configuration which now has a failed drive. I have a replacement (Spare) drive (same part number) that i'm ready to swap in to the system to replace the faulty one. My question is: does it matter what data is ...
Hello Team, Currently in our DC we have 5108 Chassis installed with B200 M4 servers and we have some some slots left in chassis. As we know that B200 M4 is EOS and we running out of computing resource so it utilize the free slots, we are consider...
Hi, We use a Cisco Server UCS C240 m3 in our company. After weekend, we found our server shutdown( Probably blackout). After Power up the server , it seems the server running correctly but he display nothing in the screen and the led mouse is not pow...
what is the order of update? Do we update the ENIC/FNIC driver first when we move to a New Host Firmware. E.g we are at 2.2(8) Host firmware and we want to move to 3.2(2) Host firmware. should we update the drivers first and then host firmware or oth...
Has anybody gone through the process of setting up UCS Manager with a certificate issued from a Microsoft Certificate Authority? If so I would appreciate some assistance. I was able to successfully create a request and have generated the certificat...
Hi, We have B200 M5 that came with 4 DIMMs [not in the same box], and 2 CPUs I read the sheets about the B200M5 DIMMs, and inserted the DIMM like in the manual [The CPUs are in 1 & 2] I tried 2 things to do : 1. For CPU1 : A1,D1 For CPU2 : G1,K1 in...
Hello, I have a UCS C240-M4 in the 12-drive form factor (RAID), as well as two drives attached to the first PCIe riser (SATA). I just got this out of the box so I haven't loaded or configured anything on it yet. I'm planning on installing Windows...
Hi, I'm trying to associate a service profile (based off a service profile template (SPT)) to a B200 M5, (without local disk) having previously been attached to a B200 M4 with local SSD, but it fails with apparently two errors: Service profile co...
Nexus 3548X will no longer boot after incorrectly trying to downgrade to 6.x. I am trying to figure out how to recover from this at boot prompt but haven't so far. Any pointers on how to get out of this appreciated. I figure I need to boot from the n...
I have a C240 M5 with a VIC 1385 - connected via QSFP to a NM-2-10G module on a 3850-48P. Configured as trunk port. Link shows down in CIMC. Any help greatly appreciated. Thanks
Resolved! Authentication error on UCS Manager
error: Login error: Authentication failed, we have configured ldap. the same configuration work on ucs central. UCS central 2.0(1d) and UCS manager 3.2(2f)
Has anyone had success booting a B200M4 with UEFI and Windows 2012R2? We are able to install the OS without issue but once the install has completed and the server reboots we get a BSOD stating that the ntoskrnl.exe is missing or corrupt. I mounted...
Hi,I would appreciate quick response as this is in production environment.currently we’ve 3X UCS 5108 chases configured in HA with full blades mix (B200 M2, B230 M1) using two 6296 UCS Fabric interconnect connected to two Cisco MDS 9148 SAN Switch wi...
