Problem description: We are aware of a new publicly disclosed class of vulnerabilities referred to as “speculative execution side-channel attacks” that affect many modern processors and operating systems including Intel, AMD, and ARM. I see new Cis...
Forum Posts
Resolved! Power management functionality UCS C
Hello, How do I configure power management on a Cisco UCS C220 M3 alone host and C200 M2 too?I Need that information for configure a fence agent and hardware settins on RHEV Thanks,
Hi, I was attempting to upgrade the CIMC and BIOS firmware on my UCS C240 M4 server. When using the Cisco Host upgrade utility I selected the CIMC and BIOS and hit update. When the update was finished. I hit exit and my server immediately shut off. ...
Trying to install Windows Server 2016 on a C240 M4. The server has 2 Intel SSDs connected to motherboard SATA ports, so disk controller is the Intel C610 Series Chipset/Intel X99 Chipset Platform Controller Hub (PCH). I have managed to configure th...
Hi Everyone, I recently acquired a UCS-E140S-M1 server, and have been testing out various installations. My great hope was to install Windows Server Preview (i.e. WS 2016 17046), however this only seems to work under legacy booting. I'm aware that on...
Hi , I'm building C240 M4 & C460 M4 servers for our project. I have confusion when choose 10Gb card. I have 2 questions: Which 10Gb card should I choose for only 10Gb connection from server to switch?I choose [N2XX-AIPCI01] Intel X520 Dual Port 10Gb ...
Hi Everyone,I have Blade server B200 M2 using the adapter: M81KR (PID: N20-AC0002). My question is:- What is the maximum UCS firmware version that support this adapter ?- I have checked in Release Note 3.1(3a). I don't see this firmware version suppo...
Resolved! install enic/fnic on Centos 7.4
I try to install enic Driver in actual Version on Centos 7,4 (2.3.0.44) I try yum install also as rpm. The result is, that the Driver is found in the correct Directory: /lib/modules/`uname -r`/weak-updates/enic/enic.ko But the Driver don't load an...
Hi all, We presently have a C200M2 box with an Intel 55xx series CPU. Looking over the VMWare Compatibility chart I'm hoping someone can help clarify the ESXi version supported. When putting an a C200 M2 the Matrix shows we can run up to 6.0U2 but i...
Hi! I will upgrade from 3.1(2b) to 3.2(2d). I will follow the recommended guide: "Cisco UCS Manager Firmware Management Guide, Release 3.1" But I have some questions: 1.) In UCS Manager under "Install Infrastructure Firmware" I get two warnings: ...
Trying to connect via powershell to ucs manager/ucs central. Logging in via gui no problem, but the command line get a 551 authentication error.
Resolved! Bandwidth for UCS and vMotion query
Hi, We have a UCS Chassis with b200 M4s, connected to 6248 Fi's. In those are vic 1340's with port expanders. We have ESXi 6.5 installed on the blades. (each assigned 4 vnics, 2 on each fabric) I understand that we have a maximum bandwidth of 40Gb ...
Resolved! UCSM IP Pool Config ?
I have an IP Pool ext-mgmt with a block of 100 IP's. Only 96 are being used and I want to edit the block to remove these extra 4 to utilize them in another cluster. Is this possible? Can multiple blocks be added to a IP pool with the same subnet, j...
Resolved! Config backup may be outdated
When I log into the UCS Manager, I see the following warning. "Config backup may be outdated" Code F1392. Do I need to set up a backup job of some sort? My online research is kind of leading me to that direction. When I go to Admin > All > General > ...
Curious if anyone knows of a way to select UTC timezone? I just upgraded to 3.2 and see it's still not available. Is there a particular city choice that's safe to use to achieve the same timezone? I am not sure if UCS treats London as GMT year rou...
