i am getting error upgrading server firmware 2.2(5) to 3.2(1) sys/chassis-1/blade-5(FSM:sam:dme:ComputePhysicalAssociate). Remote-Invocation-Error: BIOS Update Failed: Unable to flash new BIOS Image any idea?
i am getting error upgrading server firmware 2.2(5) to 3.2(1) sys/chassis-1/blade-5(FSM:sam:dme:ComputePhysicalAssociate). Remote-Invocation-Error: BIOS Update Failed: Unable to flash new BIOS Image any idea?
Does anyone know if the Qlogic QLE-2694 Fiber channel adapter is supported in the UCS240 M3 SFF?
Hello, Does Fabric Interconnect 6100 series support Dis-joint layer 2 configuration. As far as my understanding it has nothing to do with hardware, it is related to code that is running on the FIs. I have 2.x code running on FIs (6120s). Please let...
Hello, I ran the 3.0(3a) host upgrade utility on a C220 choosing to upgrade all components. During the process the server powered down, and now I can't authenticate to the CIMC to get back in to power up. I've tried the current admin credentials I ...
can someone help on this? need to get the model # and serial on my blade servers
Hello, Is it possible to have the UCS FI uplinked as below for FCoE connectivity-- UCS FI --> Nexus5k (NPV mode) --> Nexus5k FCF Thank you!
Hi,I encountered the following Ansible Modules for UCS Manager article:Ansible Modules for UCS Managerand wanted to find out if there is an Ansible module (or modules) available (or in the works) that will help with provisioning Service Profile polic...
I am unable to find and download recommended enic driver for my UCSB-420-M4 server. As per HW SW compatibility matrix recommended driver version for Redhat OS is 2.3.0.31, but enic driver version in the ISO is outdated. I cannot even find the require...
I have integrated UCS-Central into UCS-manager and created some test UUID Pools, MAC pools on UCS Central but my problem is that they are not showing up in UCS-manager, does anyone know what i am doing wrong?
Hello, is there a best practice guide for a bare metal setup with B-series M-4 B-200 with Server 2016 as the OS?
HiI would like to upgrade the UCSM infra setup from 2.2(3b) to 3.2(1b).So please can someone help/guide me that below steps are correct to achieve my upgrade task.->First Upgrade UCSM from 2.2(3b) to 3.1(3c) and then upgrade blade firmware to 3.1.3c...
I just started a new flexpod deployment using UCS version 2.2(5a), The plan is to use FCoE uplinks but there is no place to assign the FCoE port channel to a specific vSan we do have the option in older firmware but for some reason it either does not...
I have added 300 VLANs in UCS (at the LAN CLOUD - VLANs level) using the add vlan gui, and I now see the 300 individual VLANS listed (rather than a pool). I would assume this is correct though unweildy in the GUI. If I want to assign all 300 of tho...
Dear all,My company has purchased a new server for replacing the old one. The new one is model UCS C200 M2.This server is containing a raid controller LSI 1064E for RAID 0/1 setting.I did configure the RAID 1 and installed the Windows Server OS alrea...
Hi everybody,when i finished to setup service profile i always get the same error:Config failureAssociate state: unassociatedAssigne state: failedConfiguration error: Connection-placement There are not enough resources over...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-18-2024 06:29 AM | ||
04-17-2024 10:28 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM |