Hello, I try to transfer a file to UCSM for firmware upgrade but the proccess gets stuck in 73% and current task says:. " sync image to subordinate". Also I get one critical alarm and 3 warnings about faild copy image. I check the bootflash spac...
Hello, I try to transfer a file to UCSM for firmware upgrade but the proccess gets stuck in 73% and current task says:. " sync image to subordinate". Also I get one critical alarm and 3 warnings about faild copy image. I check the bootflash spac...
We have to Mirgrate two Blades with local Disks (Boot + Data) to another UCS Domain. I know that there might be troubles with the NICs aso. But the most thing we are worried about is the data on the local disks and if the Blades will boot on the new ...
I am confused about the difference between the "bundle" and "offline bundle" that come with the UCS VMware driver ISO. The zip files contain completely different VIBs, for example for an fnic driver: In fnic_driver_1.6.0.34-offline_bundle-5367434.zip...
Hello Team, i am having UCS C 200M3 and its vmware is corrupted and i am trying to access KVM to install the ESXI but it is showing error and unable to access KVM.I have installed java 7 update 71 and uncheck TLC 1.1 and 1.2 option but still is not w...
IO Module generate error "TCA: etherNiErrStats crcDelta for sys/chassis-1/slot-2/fabric/port-1 , current-value = 67, raised above esc value 5" Firmware version 3.1(2f) Ports FI do not have error. Thanks.
Hi Team, Is there any way to enter Rack information manually of CISCO B-series blades in UCS Manager or UCS central ? Thanks Vaibhav A.
With in UCS manager and under Equipment, Chassis, Chassis #, IO Modules, IO Module #, Backplane Ports, why I only see the ODD number ports? Is it because there is only VIC1340 card installed in the B200M4 blades? If so, will the EVEN number ports sho...
Dear everyone, We are sizing Cisco UCS for our new system. We wonder if there is any recommendation for "uplink : downlink" ratio that we should consideration? Or more generally, is there any best practice to calculate FI's uplink? Thanks in advance!...
Hi Guys , We have a POD with old FIs [you can see model & firmware on screenshot "fi-model-firmware"] We got a critical error that says that "ETH_PORT_ACTIVATION_PKG" has been expired [see screenshot "as-error-01"] I downloaded licenses from cisco si...
i currently have a ucs mini. I want to add two additional chassis. Since with the ucsmini we have the Fi6324, can i remove the FI6324 from the ucs mini and replace it with a fex2204 which will be connected to an external FI.+ the external FI will ca...
i cannot delete a backup I have in ucs. any idea? I cant modify it
I am trying to install ucs director 6.5 Successfully deploy the OVF, but after I power on the vm the centos OS is not booting and immediately i get an error wrong fs type, bad option, etc...
After troubleshooting an issue from an already open question, a new issue has arisen. I am opening a separate question as this problem is new and I figured a new question should be asked about it.Following the instructions from this question, I re-a...
we are having CISCo UCS environment(8 ports backplane ports-->IO module) where im seeing the 9th port(i.e in chasis 1--->1/1/9 port is belonging to "SAM management VLAN".What it is referring" we are having another CISC0 UCS environment(16 ports backp...
Hi, This is Jaeyul Kim. I have some questions. I support to 6248 FI and In my customer site, There is 16G SFP to 6248. I already known that support FC 4/8G SFP, but I have done check unsupported 16G SFP entered this product. (not print part number...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 12:18 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |