Hi Guys, Is there any requirements for SD cards in UCS C220 M4? (size, type, class)Or I can use any SD card Thanks
Hi Guys, Is there any requirements for SD cards in UCS C220 M4? (size, type, class)Or I can use any SD card Thanks
I have a Cisco UCS Mini Blade enter with two B200-M4's and one C240-M4. All three Blades have memory installed in the first two DIM slots ie A1 and A2 but not A3....H1 and H2 but not H3 etc. All three Blades have ECC memory errors logging in the SE...
Does anyone know how I can configure my UCS environment to be managed from a second VLAN? Here are the background information: - in our network, we made the management network as Isolated and this network is dedicated for management only. So the ho...
I've attempted to install ESXi on a C220 M4 using SCU on FlexFlash but the installation fails with the following error; an error has occurred while parsing the installation script error:file://etc/vmware/weasel/esx_ks_sd.cfg:line10: error (see log f...
Hi Guys, I have two Servers C series I installed VMware Esxi v5 inside it then CUCM 8.6 and I made NIC teaming inside each server VMware and port group in my 6509 core switch which is connected directly with servers. C220 server(VMware esxi+CUCM) -...
i install esxi 6 on ucs b200M3 it is work good when i install esxi 6.5 in server side i not network good network not ping any ip address only ping server ip address
Hello, we currently have an environment of about 11 Chassis and around 175 blades, we are discussing a plan of doing a FW upgrade from 2.2.6f to 3.1.2b and I'm wondering if there will be any downside if we do upgrade the UCS Manager, IO Modules and ...
We have configured RAID 6 on a Cisco UCS Rack server C240 M4 which 24 nos. of 1 TB Harddisk. RAID6 is configured properly and we are able to see the usable capacity. But when we install a Linux Modified OS on it, we also see 2 more hard disk (see att...
We are currently developing an automation portal with: CPSC, CPO UCS Director. But, I'm faced to a really annoying problem: The task Execute VM Command and VIX Script are unusable. I did the troubleshoot with: PowerCLI, Result => Command executed ...
Does anyone have any experience upgrading to HUU 3.1.3? We're currently running 2.3.2 on UCS-E140S M1 and M2 blades. Any issues to be aware of? We see a fair amount of CIMC failures in our current environment. GUI is pingable but not responding. SSH ...
Can you tell me what Raid controllers available for the UCSC-C220-M4S are supported in VMware and also what versions of Vmware?
Hi Guy , Good day ! Today , i am spending whole day in looking the solution for this , but it was a bad day for me .I was accessing the cimc of the cisco UCS 220 M3 server and when i clicked on the kvm console button from the CIMC panel page , the kv...
Hi, Can two different service profiles be associated with the master and slave in a B460 M4 server ? Or do the master and slave together forma single server to which only one service profile can be associated? Thanks, Pooja
Are there any clear and concise instructions on how to install the emulator from start to finish? From file download to being able to open and launch the emulator? I have the guide titled "Cisco UCS_Platform_Emulator_Release_Notes_3_0_2cPE1.pdf" but ...
I need to plug in more SAS connected disks to my C220 M4S server and I just have two questions. First is, I noticed there are two SFF-8087 ports on the board but it doesn't look they support SAS (Cisco Documentation specifically says SATA only), how...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-17-2024 10:28 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |