i cannot get esxi to boot from the cypress sdcard. esxi is installed already. any idea?
i cannot get esxi to boot from the cypress sdcard. esxi is installed already. any idea?
Hi, I was wondering if it is possible to create a unified Port-Channel. I know that is possible to make unified Port.
Hi, I have been downgrading the firmware on some B200 M3 servers to match the rest of the estate, one of the blades in Chassis 4 had an issue during the process and now the Adapter is showing no firmware and a critical fault on the sever. I have trie...
I am unable to migrate from IMC supervisor 1.1.0.2 to 2.0. During the migration an error comes up that Performing migration path check for platform source version 5.3.0.0 and product source version 1.1.0.2[Wed Nov 23 18:45:09 UTC 2016] Supported Ve...
I was in the process of upgrading our UCS Mini to 3.1(2c) where our rack mountable C240 server upgraded the Board Controller from 21.0 to 24.0. That was successful but it then proceeded to error with CPU in-operable. The update was successful to Bo...
Hi everyone,I can't find any information regarding if it is possible direct connect a C220M4 with a VIC1225 to a Netapp storage array (iSCSI).Thanks,Luis Policarpo
hi, expert: what's wrong with my UCS-MINI, Have already configuration boot order with SAN BOOT. but actual boot order display : "Not found. Please verify device presence" please refer attachment picture :
Attempting to install Ubuntu and the machine continues to boot to the GRUB My Raid configuration is set to 0. I am able to access the webGUI via the browser on any LAN computer. What am I doing wrong with the set up?
I have two pairs of clustered FIs, each with identical C220 M4 servers patched into 2248 FEXs. Each server has two network adapters, a MLOM 1227 and a VIC 1225. Only port 1 on the MLOM is patched to Fab-A and only port 2 on the VIC is patched to Fab-...
Hi Is it possible to change the name of the UCS manager? The current name identifies the physical location of the chassis which are being moved to new datacentres. One of the chassis can be reconfigured as it will be repurposed after the move but the...
Hi Is it possible to configure a UCS environment with just one FI? I am aware that this is not a good idea and there will be redundancy considerations but I have been asked the question. It will be in a test environment but support from Cisco would s...
Hi, I am trying to retrieve Peak value by UCS switch using XML api. REST query <configResolveClass cookie="1449975259/239ac70b-3cfb-436e-9d19-746ad19f969b" inHierarchical="false" classId="etherRxStats"/> Output <configResolveClass cookie="1449975259/...
Hi, im plaining to upgrade my ucs server firmware from version 2.0(3d) to 2.0(13f) , before upgrading server firmware is there some sort of required upgrade? also can i go from 2.0(3d) to 2.0(13f) directly or i need to follow some sort of upgrade t...
Hi All, Can anyone help me out in clearing me out with below mentioned doubts, I am interested in taking up the CCNA collaboration certificate(210-060 CICD & 210-065 CIVND),can I take up these paper separately?. If I can take up the paper separately...
H, I hope you had great Christmas time! I'm currently working on the new Nexus lab and I have one challenge. I'm trying to get 1/10 Gbps Ethernet Module up and running. Do you know where firmware is located for this modules and how to set boot var...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM | ||
02-20-2024 12:52 PM |