Hello,I've got a UCS Mini Chassis with 5 blades to play around with to learn with - Each of the blades has 2x 600G disks in them & an SD card.Is it possible with to install ESXi on the SD card and then use the local disks in a mirrored configuration ...
Forum Posts
I have apic on UCS C220 M5 Rack Servers. I update CIMC and other components using HUU to version 4.2.2a. After update CIMC GUI is not responding. I can ssh to CIMC ip address and the apic is seen in aci fabric as Fully fit. I have rebooted cimc, disa...
Resolved! Increase disk space
Not had any luck in finding the info, does any one know how to increase the 2 x 40gb disks deployed with the OVA for central 1.4.Thank you
When looking at the UCS CIMC configuration, several ports are listed as open. Most are explainable but i cannot find info on the follow two ports. What are they and what are they used for? Andromeda Management Port 8889 Andromeda Cloud Port 8...
Hello Team,,we are migrating from N5K to N9K. The nexus 5K has ports working as FCoE, when we configure the same configuration on the Nexus 9k (vfc ..... ) , no FLOGI database have been found. and the vfc trunking state is stucked in (initializing).A...
hello everyone i will like to know it there is a way to get the date / hour of CRC or FCs error . I can look the counter in USCM , but i cant find a way to get a log of these error :; We ve got some on our system but i dont know if they are old or ...
Hello - I'm looking for a general time estimate needed to Setup UCS (Connectivity & Initial Configuration/Patching).I couldn't easily find a quick estimate of time in the documentation. Might someone have an estimate that they would be will to provi...
Resolved! UCS Port Channel LACP policy
After creating an LACP policy in UCSM (from default to Fast), is it disruptive when applied to active port channels?
Hi All,I have a C220 stand-alone and I want to configure LDAP group authorization. There is no way I can edit AD to add CiscoAvPair.My search parameters are below.I can debug LDAP on the CIMC and see I can authenticate with LDAP and my username is fo...
We have a standalone system the is running: [root@XXXXX:~] esxcli software profile get Cisco-UCS-Custom-ESXi-70U1-16850804_4.1.2-bName: Cisco-UCS-Custom-ESXi-70U1-16850804_4.1.2-b Need to install patches and in the past I have simply performed the up...
Hi,From time to time, we have a need to :1. Create a new VLAN on FIs2. Add this VLAN to all of our Service-Profile Templates [around 8]And we want to make it automated.I tried few CLI commands to get info about our Templates, and then try to use "set...
Hi folks, I hope you can solve this one for me. In the Intersight GUI, I can see (Infrastructure Services > Configure > Chassis> MyChassis >| [Inventory] tab) that the IP addresses 172.16.26.161 and 172.16.26.162 have been assigned to the IFMs What ...
I have a server that is not responding when trying to access through GUI interface. We can ping the address and also access CLI from SSH session. I saw there was a bug found but I believe our version (3.0 (1c)) is passed the bug fix action. We did po...
I can see Calvium PCI card is installed on the CIMC as below. It has 2 10G ports, and can I use them as a normal 10G port? Such as assigning IP and connect to a Cisco 3570X switch 10G port By the way, It doesn't appear on the network adapter tab. E...
Resolved! L2 on a UCS6454 with no upstream N9k
Hello, I'm trying to figure out if and how to configure 2 vNIC's on 2 different b200 blades to communicate without having to use a northbound ACI switch. Each b200 has a vNIC-a and vNIC-b Both vNIC's have been given the same random vlan 1234 Both vNI...
