Hi Support, Could anyone will provide the CISCO UCS PPT presentation including some technical stuff and key benefits of CISCO UCS servers.
Hi Support, Could anyone will provide the CISCO UCS PPT presentation including some technical stuff and key benefits of CISCO UCS servers.
HI: I have a Cisco UCS B200 M2 UCSM 2.2(3e). After upgrading 3 blades with a Cisco customized VSphere Esxi 5.1 U3 ISO (This is the one recommended in cisco matrix), every time any of these 3 blades get restarted, they lost connectivity with the res...
Since we started ordering UCS B200 M4 blades with the new 1340 VIC adapter we have noticed that the blades intermittently crash with any Windows server OS (2008 R2 and 2012). The blades display a BSOD stop error as attached. I suspect this is being c...
Hi community,I 've read that it is always suggested to use CIMC for monitoring your Cisco rack-server, however you can use any SNMP tool to monitor the hardware components. Is there any difference between using XMP API and snmp? Should we use both to...
I deployed UCS DIRECTOR and Tried to add physical accounts but it is not allowing me to add account and it is not discovering. Error:"Could not establish connection to physical account".What could be the issue and how to fix.Please somebody help....
Vikash,Is the following vpc config advisable?For exampleN7K01 and N7K02int e 1/3 channel-group 10 mode activeint e1/4 channel-group 10 mode activeint po 10 desc conn to N5K vpc 10 N5K01 and N5K02Int e 1/3 Channel-group 20 mode activeInt e 1/4 Chann...
Deployed UCS Central 1.3(1b). Successfully registered one domain.The registration of the 2nd domain got stuck. (see screen fsm_status.png)************Repair State: DoneRegistration Status: RegisteringFSM Status: In ProgressCurrent FSM Name: Register ...
A C220 M3 rack mounted server with an LSI MegaRaid 9271-8i raid card in slot 2. The optionROM is enabled, onboard storage is disabled.The boot post shows two physical drives and one virtual drive.The raid array cannot be added to the boot order and ...
Hi -would one be able to export a configuration from a Cisco UCS to import that config into a brand new UCS / Domain? What are the pitfalls if any? How much clean up would need to be done? I want to get server profile templates etc imported over.
Hi, this is first time im using Cisco server and we have Cisco c240. My task now to monitor this server using SCOM. From research i understand that we need to install/configure UCS Manager. But i'm not really sure how to configure it, i know it simil...
Hi everyone, My customer has ordered two new chassis. Because they only order 1 SFP-H10G-C5M per IOM for new chassis and old policy is 2 link , I must change the chassis discovery policy to "1 link". From the configuration guide, I must re-ack the c...
Hi folks, i have a question regaring on the portability of a service profile, actually running un an B200 M3 with UCSB-MLOM-40G-01, moving to an B200-M4 with UCSB-MLOM-40G-03. There are no failures while changing the association, but when the SP is n...
Hi Team, i was facing an issue while integrating UCS mini with borcade 300b and later after reading the document found that it doesn't support FC end host mode. So i directly connected UCS mini FC ports with EMC storage and configured zoning on ucs o...
I have received the following error code on one of our B200-M3 blades. There were no changes made to UCS about which I am aware. The LED on the front panel is green. I did not receive a "call home" notification. The error occurred several days ag...
I've been working with REST API calls via UCSd, and I've been able to get details of reports (report names, reports produced etc) via the API calls but I've not been able to get actual report data. Is this possible? If so what API call do I need to b...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 12:18 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |