Unified Computing System Discussions

Resolved! trying to clear ECC errors

I have a server whose Health LED is amber, and UCSM is showing an F1237:Description: Health LED of server 7/1 shows error. Reason: DDR4_P1_A1_ECC:Sensor Threshold Crossed; DDR4_P1_A2_ECC:Sensor Threshold CrossedLast Transition for this fault is 2015-...

Resolved! UCS C200 m2 does not boot

Hi there, I have two C200 m2 one of them is not working at all, when I turn it on nothing comes on the screen and the fan is spinning like crazy.The lights on the front panel are green nothing umber but it just does not boot no POST nothing.Not sure ...

CIMC KVM Console on Cisco UCS C200 M2 always connection failed.

I just updated CIMC firmware from 1.4(3t) to 1.4(3w)I tried both Linux and Windows machine with Java 8 u11, u20, u25 64-bit and IE, Firefox and ChromeEverything works fine on 1.4(3t) beforeAfter I open Java Web Start with .jnlp file that I got from K...

I got the issue in Hyper-V 2012R2 server on C240M4 Server

Im on UCS C240M4 server installed Intel Xeon E5-2699 v 3 CPU, I can see the CPU os 18 cores but just only have 32 Logical Processors ? but it should be 36 Logical Processors, do I need to disable or enable something to got Max Processors ? As you ca...

UCS Ports

Hi all,Please can someone explain me about the UCS ports types, I'm really confused. thanks.

after turning off the power does not turn on the server Cisco r210 automatically

Hello everyone!The question is, the server works fine, but after emergency shutdowns power server does not automatically turn on. Help set it in the correct way. How and where to go. Or tell me where to get instructions

Resolved! Is possible let multi UCS domain enable VM-FEX and join to the same vCenter

Hi Experts,We have 7 UCS domain. But only have one vCenter. Now we want to enable VM-FEX on each UCS domain and join to the same vCenter. Is it work? I did not find any configuration limit description about this relation.Or we must create 7 vCenter f...

UCS blade servers are rebooting automatically when i disconnect the connectivity to MDS & core switches from FI

Dear All,I have an infrastructure running with an standalone FI & with 8 blades.I have configured service profiles & every thing is working fine.Issue:When i remove the connectivity on the MDS, network core switch, MGMNT Switch from FI, the servers a...

Resolved! Hard disk Replacement on RAID 10 (UCS-C200-M2)

Guys,I am running RAID10 on UCS-C200-M2 and swapped one of the failed disk.Currently there is beep sound for more than 12 hours and I assume the new disk is rebuilding at the moment. On top of that, Physical drive status is currently on "unconfigured...

Distance between FI and Chassis

Hi,I would like to know the distance limitation between fabric interconnect and chassisAs of now we are running short on rack space and we need to mount chassis in another location might be 500+ mtrs away from Fabric interconnect? want to understand ...

Resolved! link aggregation in ucs servers

Hello. Is it possible to aggregate links in UCS manager to get single link speed more than 10gbps on each server? How can I do it? I can build bond interface on linux, which installed on server. But what should I do in UCS manager?

CISCO UCS Backup Steps

Hi community, I have doubt in CISCO UCS back configuration,While taking backup of cisco ucs configuration will we need downtime for the server...?Could you please explain me in brief.....? Expecting ASAP. Thanks in Advance

UCS c220 M3S after replace Raid Controller and battery, there is beeping sound : 1 sec on and 3 sec off

Dear all,I am now running on UCS c220 M3S running BiOS 1.5.1g and CIMC firmware 1.5.1b. There is a LSI MegaRaid 9266-8i (Firmware 23.9.0-0023) controllerAfter replace Raid Controller and battery, there is beeping sound : 1 sec on and 3 sec off withou...

Resolved! UCS c240M3L server with Nvidia Grid K2 GPU not loading driver on ESXi 5.5

I could not get ESXi 5.5 to work properly with sVGA mode because I could not get the NVidia driver to start properly.I can see I loaded the driver manually (version 3.45.69). --- # esxcli software vib list | grep NVIDIANVIDIA-VMware_ESXi_5.5_Host_Dr...

Cisco UCS Emulator not downloading

Hi I have tried to download the .zip and .ova files of all of your UCS Emulators, and they are failing halfway.Please fix this, so it can be downloaded.

Unified Computing System Discussions

Forum Posts

Resolved! trying to clear ECC errors

Resolved! UCS C200 m2 does not boot

CIMC KVM Console on Cisco UCS C200 M2 always connection failed.

I got the issue in Hyper-V 2012R2 server on C240M4 Server

UCS Ports

after turning off the power does not turn on the server Cisco r210 automatically

Resolved! Is possible let multi UCS domain enable VM-FEX and join to the same vCenter

UCS blade servers are rebooting automatically when i disconnect the connectivity to MDS & core switches from FI

Resolved! Hard disk Replacement on RAID 10 (UCS-C200-M2)

Distance between FI and Chassis

Resolved! link aggregation in ucs servers

CISCO UCS Backup Steps

UCS c220 M3S after replace Raid Controller and battery, there is beeping sound : 1 sec on and 3 sec off

Resolved! UCS c240M3L server with Nvidia Grid K2 GPU not loading driver on ESXi 5.5

Cisco UCS Emulator not downloading

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

CIMC vkvm won't start

UCSX setups in two sites for client

X Series Chassis & Blades

Cisco Champion Radio Podcast:Cisco Compute Hyperconverged with Nutanix

Windows Server 2019 does not see virtual discs C220 M6

B200 M5 Blade Physically Stuck in Chassis

WWPN not showing on NPV flogi-table

UCS FC Port-Channel with Broade SAN SW

Windows Server NIC Teaming vs vNIC failover

Can my FIs support : UCSB-EX-M4-1