I am trying to get a list of my FI, Names, OperVErsion but I can only do it in 2 cmdletshow do I combine the 2?get-ucsfimodule | ft model, UCsget-ucsfirmwareinfra | ft ucs, operversionany idea?
I am trying to get a list of my FI, Names, OperVErsion but I can only do it in 2 cmdletshow do I combine the 2?get-ucsfimodule | ft model, UCsget-ucsfirmwareinfra | ft ucs, operversionany idea?
what is the diffrence between SFF and LFF servers.
I'm trying to pull a report that lists the various profiles currently in use via PowerRools and UCS Central. I've taken a look at the Get-UcsCentralServiceProfile cmdlet and at the Get-UcsCentralComputeInstance, but I'm not sure what individual prope...
Hey guys, I've updated my UCS Central to version 1.3(1a) and now I have some faults. I acknowledged them, but they won't get away. If I use CLI to "ack" them, they does not exist, whether the "show" cmd list them. Very strange. ucscentral /moni...
Dear All, I have an environment, where the configuration is done upon the standalone FI. Now Customer bought another FI. Request you let me know the best practice to convert the standalone FI in to cluster mode. If any one can share the document tha...
Hello, looking to clear out all of the port statistics in UCS Mgr for FC and Eth ports. Not sure how, found nothing helpful ... CLI commands welcome also.ThanksB
HiI want to get traffic Infomations from UCS (all statistics infomation)Though I know I can get this infomation with GUI , what I want to do is using CLI not GUI.anyone who knows how to get this infomation via cli , let me know
Hi AllWhat is the difference between inband mgmt IP and outband mgmt IP and How could I configure the inband as when I tried to configure it I received the following error:vlan"xyz"resolved to unsupported vlan ID as in attachedBTW the procedure I use...
Hi,I am running UCSM FI 6248 to manage 5108, and in equipment tab it shown avail state : unavailable. there is no fault or alert.I cannot ping esx server inside that chassis.Need your advice? Thank you Regards,ADIT
Hi Community !I need to update VMware vSphere on a Cisco C210 M2 standalone server. I check the compatibility matrix and find the latest firmware version supported with VMware vSphere 5.5: version 1.5(6).As I understand, updating server firmware need...
Has anyone been able to setup UCS monitoring using snmp v2c for Solarwinds? Documentation seems scares on the interweb and the Thwack support forum on Solarwinds is not very helpful. Does anyone have any good writes up on how to set it up?
Hi; Im using a Cisco UCS 240-M3 server, I have 24 x 600 GB SFF 10K rpm disk, and Im build a Raid10 2 span 10 + 10 disk. 4 global hot spare. Raid Config;Strip Size : 256KDrivers per span : 10Span depth : 2Access-Policy: Read-WriteCache Policy : Cached...
Good morning to all, we just purchase an UCS C220 M4-S, but we only have one HDD, we are still waiting for the second one.I guess there is no problem in start working with VMware and the final VM, and later when the second disk is here make the RAID ...
Hiis UCS central ver 1.1.1b support storage cloud like local zoning and direct attached storage as in version 2.1(3b) ?it seems that this is possible to make a connection policy on the UCS C. ?/Ola
Using Central 1.3(1a) I'm trying to delete some sub organizations that were created as test orgs. Using the old "GUI" I right click and select delete it asks to confirm. I do so and nothing happens. When I try to delete using the new "GUI", it return...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 12:18 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |