Unified Computing System Discussions

UCS Minor Fault F1083 vsan membership down after upgrade to 2.2(2c) from 2.1(1e)

I recently did an upgrade of my UCS system from 2.1(1e) to 2.2(2c). I have 9 minor faults F1083 vsan membership down that I've been trying to figure out how to resolve. I have found this link but it says it should be fixed in 2.2(2c).https://tools....

Resolved! Can B200 M2 and M3's work together?

I have a chasis running VMware ESXi on 4 B200M2 blades and we are looking to add a B200M3 blade. Will I have any issues moving guests between the M2 and M3 blades?

Intermittent network connection problem ping timeout between two Cisco UCS B200 m3

I'm having a problem with my Cisco UCS B200 M3 and was hoping someone could give me some advice on locating the problem.Detected a network connectivity problem, intermittent between two Cisco UCSB-B200-M3. The ping timeout. The problem occurs only be...

UCS iSCSI and Storage (EMC VNX5300) design calrification

Have a UCS B series deployment. Nothing special just dual 6248 FIs. Brocade ethernet switch on the uplinks not Nexus. Because of the limited 10gb ports on the Brocade we want to attach the VNX using appliance ports to the FIs. All designs I found poi...

Resolved! Critical Alarm - policy-ep/scope-cont-managed-endpoint/context-sys_pki-ext/scope-pkiTP-name-

Hi, I'm trying to clear this critical alarm in my Cisco UCS Severity: CriticalCode: F1000497Last Transition Time: 2014-12-08T11:13:41.853ID: 643849Status: NoneDescription: [FSM:FAILED]: (FSM:sam:dme:PolicyPolicyScopeResolveAllPolicyFsm)Affected Objec...

Cisco UCS Native Vlan Misunderstanding

Dear allI have Cisco UCS V2.1(a3) and B200M3 with MLOM Vnic 1240i have Question Regrading when Create vNIC that will associated to Service profile for install MS windows server 2012 Data centerUCS ask for some parameter like name and MAC address and ...

Resolved! UCS Calculator

Is there any sort of calculator or tool available that will help size a UCS deployment for larger scale designs?Thank you, Michael Sluss

Stuck on "Repair Cert Verify" in UCS Central Integration

I am trying to register a UCS domain to UCS Central. This is the UCS Emulator version 2.1(2a) but I still feel that it's not an emulator-specific issue, so I'm posting here.On the FSM tab, I'm stuck here:It will go through steps 1-4 every 10 seconds ...

Register with UCS Central - Stuck on Repair Cert Verify Guid

I've got a new instance of UCS Central running v1.1.1a up. I'm trying to register my 3 UCS Manager domains. It seems to accept the hostname/shared secret and prompts me about accepting the certificate. But when I look at the FSM tab I see it's stu...

UCS Networking with Windows Servers (bare bones) Connected to multiple VLANS

Not sure why I am having such a hard time with this... I am setting up my first UCS. I have a couple W2K8 server installed on a couple of blades. Each of these servers will need to connect to different networks/VLANs. Normally I just connect each ...

C240 M3 LFF with BROADCOM 57810 10Gb A-FEX SFP+

Hi All, We are trying to connect 10Gb interfaces of BROADCOM 57810 10Gb A-FEX SFP+ to upstream Cisco 3850 10Gb ports. We tried both sfp-10g-sr and twinax cables but the link is not coming up. Any suggestion is highly appreciated. Thanks,

Cisco UCS VIF Paths Admin down

Hello i have a problem with cisco ucs. I deployed a Service Profile with vlan and vsan. After that i cant see the wwpn's on my San Switches. In the Server menu on the vif tab i found the Problem, the fc1 Connection has the vif Status "Admin down". I ...

Utilizing AD for User/Group Information

Hello All-I am trying to set up UCSD with multiple vDC's for varrious organizations in our environment. Certain organizations should have their own administrators and some administrators in one organization may be administrators in other organizatio...

Cisco UCS 6324 Fabric Interconnect Used as a FEX?

Hi,Is it possible to use the Cisco UCS 6324 Fabric Interconnect as a FEX to uplink UCS 5108 Blade Chassis to Cisco UCS 6200 Series Fabric Interconnects? Thank you.