Unified Computing System Discussions

We are running the latest firmware in our UCS environment and are trying to setup iSCSI BFS LUNs. We have provisioned the boot LUNs to the blades. The blades iSCSI vNIC is assigned natively to our iSCSI VLAN. The blade can connect to the LUN as as we...

Hi there guys! got a questionIs there any chance that a Fabric Interconnect 6296 in EHM make a loop in a LAN?A couple of weeks ago we try to make a upgrade from a 6140xp to a 6296up, when the first fabric (6296) was put into the cluster one chassis g...

Hi there guys.The plan is migrate the uplinks from a fews 6500 to a couple Nexus 7000 using pingroups with no trafic disruption. So i have made a desing but i not sure if this is the best way to accomplish the objective without problems.This is the d...

Under the status tab in UCS Central it saysDiscription: Configuring Service Profile SP-Demo-Blade1(FSM:sam:dme:LsServerConfigure)Status: ConfigureResolveIdentifiersStage discriptor: Resolving identifiers from UCS Central(FSM-STAGE:sam:dme:LsServerCon...

Hello Experts,I need your assitance to undetand the design / Connecitivity for below Hardware together:2 UCS Blade Servers UCS 5108 Blade2 Fabric Interconnects: FI 62482 Nexus 5548-UP2 Nexus 2248I need to know the design strategy for above devices. P...

Hi All!In the UCS Cetral we've applied the Dynamic vNIC connection policy to the whole Service Profile. After that 54 dynamic vNICs were created, respectively. But they were created without any MAC addresses. It causes the error while associating SP ...

Hello,I have two UCS C220 M3 Server integrated in UCS Manager, and I need to install Windowss 2008 R2 Enterprise 64-bit, but I have a problem with the HDDS, the following error occurs when installing:(Re-map the iso w2k8)"Windows cannot be installed ...

Hi experts!I have a question around vNIC failover and LAN pinning.1) I understand what when you enable failover on a vNIC say on FI A, it creates a Standby/Passive VIF/circuit on FI B.  In doing so, I guess you will have to manually LB the vNIC's acc...

Hi,Is standard access-list allowed on the Nexus 5548?  If it is allowed, can you please advice how do you do that?Also, when upgrading a Nexus 5548, do we upgrade the kickstart first then system nx-os?TIAPF