i have below configuration on CIMC for LDAPS. Its not working. showing "modules/pam_auth_status/pam_auth_status.c:164:Login failed (ip:x.x.x.x, service:webgui)" error
i have below configuration on CIMC for LDAPS. Its not working. showing "modules/pam_auth_status/pam_auth_status.c:164:Login failed (ip:x.x.x.x, service:webgui)" error
Hello All, We have cisco UCS C220 M4 server its running on windows OS. We are planning to upgrade DIMM and HDD due to storage issues. but right now, we don't know the CIMC IP of this server. so can we help us to without reboot server how can find t...
Dear Cisco Geeks, Based on this information https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c-series-rack-servers/214407-installing-rhel-on-a-standalone-ucs-c240.html Please help us to searching and finding reference for Cisc...
Is it possible to have one Service Profile Template for both C & B series servers? All servers are in UCSM (connected to 2x FIs).
We have migrated away from using mirrored SD cards due to the issues presented in vSphere 7. We are now booting from SAN and using a local disk policy of "No Local Storage" with FlexFlash State disabled. The hosts still have SD cards present, some wi...
Hi All i need to change my JBOD option on my Controller from False to TRUE. I am using UCSC-RAID-M5HD (Cisco 12G Modular Raid Controller with 4GB cache) on the UCS C240 M5SX. anyone can help me..? thanks
Hi all, we are going to upgrade our existing 6248UP Fabric Interconnects to new 6454 FIs and are currently planning the migration. I have read through the migration guide at https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-...
Hello, I bought a USC C220 M4 and installed the following components: 2 x Intel XEON e5 2696 v4,8 x DDR4 ECC REG 16GB The problem is that the system keeps powercycling when I try to boot the system.While the system is booting the system status LED i...
Hi Everyone,I want to know if cisco CIMC is support SMTP with authenticationif no , is there any option or tool to send email alert if there is hardware issue
Someone at work who has now left went nuts on Service Profile Templates and, for example, created 5 templates for one type of server. So I'm looking at consolidating the templates and would like to know, is there a way to compare template settings to...
The current Storage Policy - Disk Group Policy "ST0_RAID1" is used on a bunch of rack servers with 2x HDD for RAID1 boot LUN. We now have SSD drives in our newer C240s and thus the Disk Group Policy will not work as it it specifically looking for HDD...
Hi All I just replaced my raid controller (Cisco 12G Modular Raid Controller with 4GB cache , UCSC-RAID-M5HD), i am using cisco UCS C240 M5SX server the problem is i cant access raid configuration page, i already restart the server and press Ctrl+R,...
We currently use the following disk sizes in our environment for rack servers:300GB HDD/SSD as a 2-disk RAID1 for OS.960GB SSD as a 5-disk RAID5 for Data.240GB SSD as a 5-disk RAID5 for Data.At the moment, our UCS service profile templates are only c...
I have a UCS FI I want to use for testing but for some reason it stuck in the initialization wizard...I want to re-image it but as far as I can tell, the re-imaging process is TAC only. Unfortunately there is no service contract associated with this ...
UCS 5108 - B200 M5 bladesGoogle/Cisco aren't making this easy to pin down to make a simple flat network on VLAN 1 to bring the blades up to test install ESXi and ensure all green blinkenlightsI added two interfaces to the LAN uplinks manager and VLAN...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-18-2024 06:29 AM | ||
04-17-2024 10:28 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM |