Resolved! Disable/Enable NIC with CIMC
Is it possible to disable and enable a NIC on a UCS server (C220 in my case) using the CIMC? Thanks, Mike
Is it possible to disable and enable a NIC on a UCS server (C220 in my case) using the CIMC? Thanks, Mike
Hi experts,I ran into a problem to login the UCS manager with the following error.While I can SSH to the box without issues.Could anyone help me what is the problem might be and how to troubleshoot it? BTW,I'm using macbook with firefox/safari.The th...
Hi sir:I have install ESXi 5.1 in UCS C240 with VIC 1225.I have confured the ESXi5.1 with VM-FEX standard mode.How can I change it to performance mode ?
Server Infrastructure: Microsoft Server 2012 Hyper-V installed on UCS Blade Servers. Network infrastructure is Nexus1000v for HyperV - FI62xx (endhost mode) uplinked to Catalyst 4510 Core Switch.Plan: Deploy Exchange 2010 NLB with two servers, each w...
Hello-I am in the process of planning my Cisco UCS firmware upgrade from 2.1(1a). Is it recommended that I could directly to 2.1(3a)? Are there any known issues going directly to this firmware versions? My environment consists of Cisco UCS 5108 Ch...
Hello!I'm having a challenging time getting SuSE 11.2 to SAN-boot and am wondering what others have done to get this going.I am aware of this page:http://www.cisco.com/en/US/docs/unified_computing/ucs/os-install-guides/linux/BSERIES-LINUX_chapter_010...
I have a client who has purchased C Class Servers with VIC1225 cards and Nexus 5548UP switches but just has the base license. I'm unable to establish whether Adaptor-FEX can be used or not given the specifications suggest it bundles up everything to ...
Hi,I seem to have similar problem as reported here: https://supportforums.cisco.com/thread/2124627However, I'm using firmware 2.1(2a) and Java 7 Update 25.I installed a valid SSL certificate which works fine (browser has no error in access to the UCS...
Hi,From Cisco website, i just found lots of documents that tell us how to configure with UCSM.However, in our vSphere virtualization environment, we only have UCS c240M3 and Nexus 2232PP,5548UP. We don't have Blade Chassis and blade servers, so we d...
Hi All, I want to use Cisco UCS Manager 2.0 on Windows Platform. Anyone can clarify me what are the Hardware and Software needed for using UCS Manager. Is any Cisco Hardware devices is needed for using UCS Manager on windows? ...
Currently our VSAN ID and FCoE VLAN ID are exactly the same, 1. In order to update the firmware on our fabric interconnects, I need to change one or the other with the FCoE VLAN ID being the most likely choice. When our VSAN was created in UCSM, it...
Hi,i have a (logical, so xml) backup from a UCS cluster. Someone accidentialy deleted a service profile. I know i can import the logical config but other things have changed and i want to just import the missing service profile. I could edit the XML ...
Hi, I was hoping someone can point me in the right direction, been to support and they didn't know or didn't get what I was asking. I currently have two sets of Fabric interconnects 1 in one data centre and also another in a different datacentre. I ...
Hi,Is there anyway to change in wich order the management IP addresses is assigned?Example:I have a management IP pool of xxx.xxx.xxx.101 with a size of 16 addressesThe management IP then gets assigned to a blade in slot 1 and starts on address .109,...
Hi,I have come across this problem / issue and need a help to resolve this issue.Few days back we have setup new Cisco UCS System in our envinorment with 2xCisoc UCS 6248UP Fabirc Interconnect and 2xChasis with total 15 servers (Chassis-1 have 8 serv...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-17-2024 10:28 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |