Unified Computing System Discussions

Dear All,I have UCS-C220M3 server i am planning to install VWLC(Vertual Wireless lan controller ) and Cisco Prime i coonected power ,put the hard disk after i start UCS but it showing  PXE-E61: Media test failure, check cable  this error  this my 1st...

Hi,we currently have 6120XP FIC with additional licenses bought (6 on each).We are going to upgrade the FICs to 6248.  Can we transfer the licenses to the 6248?  The 6120XPs will be decommissioned so it's not that we will be violating any licensing c...

Hi,Is there anyway to assign Chassis ID higher than 40? ThnaksHetal Soni                  

Hi,I am investigating a migration from the VMware vDS to the Nexus 1000V - is there a recommendation for the how many uplink port-profiles (port-profile type ethernet) there should be?The current VMware vDS has two uplink ports, with one pNIC from ea...

Hello,I installed our E140S yesterday in a remote office and used the HUU ISO to upgrade all of the hardware to the latest version.  After doing this, every time I login I get a popup suggesting that I upgrade the Broadcom 5719 Firmware.  I have loca...

Good Day, I'm please help if you can. I have a C210 that is out of warranty and i'm having a freezing problem when it boots.I have tried to upgrade the BIOS and CIMC to the latest version and below.Platform - UCS C210 M2CIMC - 1.4(3U)BIOS - C200.1.4....

Hi,I have an issue with one of my blade server with the Bios post completion error. The server is hung at the discovery.I have tried reseat the blade, the  tried to recover the corrupt BIOS and it failed.This is a new server and no SP attached. Is th...

Hi guys,We have a UCS220 which seems to keep randomly restarting on us. We only have 1 PSU attached at the minute, but is connected to a UPS and no other devices connected to the UPS are having any problems.The last restart happened today at about 3p...

Hi All,I am having a problem that whenever I restart my Fibre Interconnet, be it restart due to firmware upgrade o anything else, the servers become unreachanble from outside....taking KVM console, when I try to ping the gateway, it can not...only op...