Unified Computing System Discussions

Script CIMC commands over SSH?

Hi, I'm trying to automate some CIMC CLI commands to show the inventory of C-Series servers, i.e. show CPU, show hdd, etc. Typically I use Putty to SSH to the CIMC and run each command manually. I'd like to automate this process and save the results ...

Registration and updating UCS C210 M2

Hi allI have a server cisco UCS C210 M2 would like to know two things.1 - You need to register the product (the server) with the login and password on cisco website? If so I can tell how?2 - I want to update the driver and firmware from cisco website...

Resolved! UCS C210 M2 RAID 10 (1+0)

Hello everyoneI doubt the raid 10 (1 + 0) that several sources said that they needed 4 hard drives however I read elsewhere that are required of a minimum of 2 drives.Please I could indicate if server UCS C210 M2 is you can configure RAID 10 with two...

missing test aaa server ldap command

Anybody please help me.I'm already configure UCS manager authentication with LDAP by following this guide https://supportforums.cisco.com/docs/DOC-14642everything OK but in the last step i can't issue command test aaa server ldap the more detail is ...

ucs c series installation issue

Hi guys , Having a problem i am installing UCS c series ..but i unfortunately i have lost the VMWARE cd kits ..can any one advice from where i can get it or provided the download link for this..Thankyou in advacne.Shib ...

VMware LINT1 motherboard interrupt. This is a hardware problem; please contact you hardware vendor

Hello,I got a problem with 3 Cisco UCS C460 M2 that is using VMware ESXi 5.0, the problem is that the servers work fine for 2 or 3 days and after that display a purple screen with the message "LINT1 motherboard interrupt. This is a hardware problem;...

Resolved! Fabric Port Channel

Hello, Once in production, when adding cables in a Fabric PortChannel between an IOM and a FI, ¿is it needed to re-ack the chassis? (so that, we'll have downtime of the whole chassis). Or rather, as it is a Port-Channel the cables are detected automa...

Resolved! I get “INTERFACE_QUARANTINED due to Cmd Failure” error when enabling PortChannel in n1kv

I have added a new host to my n1kv, but the interface PortChannel3 appears to be in shutdown and I can't bring it up, despite of it is working.SW-OUT-N1KV# sh int status[...]Po3 -- up trunk full 1000 --[...]...

hardware virtualization? more service profiles than blades?

Sorry I am new to UCS...Someone told me UCS can do "hardware virtualization" and can allow one host OS(say ESXi) span over multiple blades. I doubt if this is the case. Is it possible to assign 9 service profiles to a server pool of 8 blades so I can...

Nexus5548P and ESxi communication issue

Hi Guys,I have a Cisco C210M2 server connected to the nexus switch directly. 2 ports are configured for port channeling and vpc.On the Server I installed ESXi and created a vSwitch and a host with an IP of 192.168.90.210I have a storage connected to ...

UCS C240 M3 power supply choice

The UCS C240 M3 server has 2 available power supply options, 650W or 1200W. However, I cannot find any documentation about what configurations of the server would require larger power supplies. Anyone have any idea about this?There's nothing about ...

MDS Zone database size warning while reactivating zones

I am getting this message from the MDS. Anybody know at what point this message (number of zones or zone database size etc) is thrown? ------------------------------------------------------------------------------------------------WARNING: New Zones...

UCS VSAN to 2 SAN SWITCHES

Hi, Cisco Folks:Really need you guys to offer your best practice's advices:Customer Setup:2 X UCS FIFabric A------------2 FC Uplink to 1 MDS, says with VSAN 111, this is hooked uo to Storage array1Another 2 FC Uplink to another MDS, also VSAN 111, th...

Nexus 1010 - No MGMT0 Access?

Hi all, I hope someone here can help!I am setting up a Cisco Nexus 1010 appliance, but cannot access it through the MGMT0 interface!What I am trying to do is copy over the 1000V .iso file to install a vsm, but I can not even ping the mgmt0 interface....