Unified Computing System Discussions

All -Am building a lab setup now that we have our Vblocks up.  We need to be able to ping back to the laptop that is in the same network and something is stopping us.  We have done the following - opened up a case with Cisco - a case with Vmware - we...

When I tried to assign a free IP to a UCS B-200 Server with a Windows 2008 R2 system in the lan, A IP conflict isse happened.But  I can confirm that the IP I set was not be used by other host. the UCS Server was installed another Sanboot Linux system...

Hello. We're looking for tech specs about Cisco Fabric Interconnect 6140 Operating System. For us is important to know if the os is NX-OS or not.---Posted by WebUser Federica Rossi

I'm getting the attached error message.  End point timed out. Check for IP, password, space or access or access related issues. Please look at the attached file.

I updated the UCS server to latest release 2.0.1s, After the update, I can't find the "Quite Boot" in BIOS...Dose anyone know it?Thanks a lot

I found this exact issue being described on VMware's message board below and it's referncing firmware updates.Has anyone else seen this and what was your fix?http://communities.vmware.com/thread/325678

Hello,I am in the process of converting a UCS system from an initial setup where everything was put in root, to a multitenant setup for multiple client organizations.There is an existing client which has one service profile template and twelve servic...

Hi,is it a bug or feature in UCS 2.0(1m)?we have some Sub-Organizations defined in our UCS-Manager e.g. "systems-prod", "systems-test"...Now when i'm trying to create a Locale (Tab Admin, User Management, User Services, Locales)and want to add a form...

I am trying to install a storage San Boot Win2K8 R2 SP1 x64 on UCS blades,(There are only 1 path to the OS installation drive during the installation.)     I loaded drivers for the M81K2 following the "UCS Windows Install Guide" , and I can see the L...

Received three new Cisco 210 M servers.I have booted up two so far, and they both display the following error:The battery hardware is missing or malfunctioning, or the battery is unplugged, or the batter could be fully discharged.  If you continue to...

I'm using the same pool of of IP addresses for my FI and KVM pool. I need to make sure that my management port on each FI is connected to a switch that is also accessible in the same range\subnet, correct?After setting everything up, I'm currently un...

I'm in the process of purchasing a Nexus 7K and I will have UCS (w/ 6120 FIs) linking directly up to it. I may also have some IBM BCs that have uplinks via a 4K switch. I was under the impression that either of these switch interconnects required an ...