08-19-2015 11:57 AM - edited 03-01-2019 12:19 PM
Hi,
I have a requirement to bind fabric interconnect uplink to vnic in service profile.
vmware vswitch will have this vnic as uplink. we need to send span traffic on FI uplink port from n/w switch, that should reach to virtual machine connected on vswitch.
any idea how to achieve this.
Thanks.
08-19-2015 12:13 PM
Hello Mazhar,
please go through the guide, it should help:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0101011.html#concept_0AB9158BFF4C48778BDD3A059E95E89C
Regards,
-SK
08-19-2015 12:34 PM
Hi Saurabh,
In UCS span config i cannot use span destination as vnic , it always gives options of FI uplink,
here in my case source is FI uplink & destination is vnic to which VM is connected.
i will receive span traffic from 6500 on FI uplink , & i need to fwd to VM inside blade.
VM is in listening mode .it will only receive span traffic.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: