02-23-2015 05:21 AM - edited 03-01-2019 12:02 PM
Hi,
What is the recommended process for moving a provisioned blade (B230 M1) to a new set of FI/Chassi?
The new platform has a service profile template created and a B230 M4 blade already provisioned.
Would the first step be to decommission the blade i the old FI? Then what? Move to the new chassi, let it be discovered and then apply the same template as for the M4 blade?
Cheers!
Solved! Go to Solution.
02-23-2015 06:08 AM
It would be:
-Disassociate the Service Profile (SP)
-Decommission the blade
-Remove the blade
-Install it in the new chassis and let the system discover it
-Assign a new SP
Be careful your system has the proper firmware to support the server and the OS. This will help you out: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Rate if helpful.
-Kenny
02-23-2015 06:08 AM
It would be:
-Disassociate the Service Profile (SP)
-Decommission the blade
-Remove the blade
-Install it in the new chassis and let the system discover it
-Assign a new SP
Be careful your system has the proper firmware to support the server and the OS. This will help you out: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Rate if helpful.
-Kenny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide