Thanks Anurag!
I had looked into C260 installation Doc earlier.
However i have captured few steps to the best of my knowledge w.r.t dealing with install/config, enclosing the same here for all new beeies ref .
I wish you could advice me more on complete Licensing process involved for C 260 M2 w.r.t pre & post of CCE ( including PCCE on c260).
Thanks in advance
-----------------------------------------------------------------------------
Guide to setup UCS C260 M2:
Create virtual machine with OVA template , download OVA template from cisco sit .
Golden Template
- •- Download appropriate OVA template from cisco website.
- •- Create virtual machine from OVA template.
- •- Install the Microsoft windows server 2008 R2, SP2
- •- Post above steps , install Call server 9.0, CVP .
- •- Enable the Remote Desktop
- •- Install the VM Ware tools
- •- Convert the virtual machine to Golden template.
For installing the CUCM , CUIC , Finesse use VOS ( Voice operating system)
Steps to convert VM to Golden Template
1 . Refer
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/pcce/pcce_901/installation/guide/PCCE_BK_IBC40C6F_00_installing-and-configuring-pcce_chapter_01001.html
Configure the PCCE Data Server
Before beginning the installation of data server, verify below parameters.
Microsoft SQL 2008 R2
- •- Validate the network adapter settings & power on.
- •- Configure Network cards
- •- Configure database drives
- •- (OPTIONAL ) Configure unified CCE encryption utility.
- •- Configure the logger.
- •- Configure the Administartion server & Real time server.
Procedure to Configure PCCE Call Server
Prior installing the Call server , verify below steps.
- •- Validate the network adapter settings & power on
- •- Configure network cards
- •- Configure Domain Manager
- •- Configure the unified CCE encryption utility
- •- Configure the Router.
- •- Configure the generic PG & CTI Server.
- •- Configure the Media Routing PG
- •- Configure CTIOS server
- •- Install Jtapi
