cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1246
Views
0
Helpful
2
Replies
jalen
Beginner

C220 M3 problem ( Boot Cycle at "config...Screen)

Hi Pro

UCS C220 M3 now Bootig at "Config..." Screen  and cycle  ;but the CIMC is OK can access from web

 


 

1 ACCEPTED SOLUTION

Accepted Solutions
Manuel Velasco
Cisco Employee

Hi Jalen,

If your server keeps looping at the configuration screen most likely the bios is corrupted and you need to recover it.

See the documentation to help you recover the corrupted BIOS. I would suggest that you try procedure 2.

Using the BIOS Recovery Header J41

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220/install/C220/install.html#pgfId-1416982

 

To get the recovery.cap file you need to download the HUU of the current version installed on your server (you can find this version from the cimc) and extract the iso.   For example for the HUU version 1.5(7e) the recover file is located in the following location

ucs-c220-huu-1.5.7e\C220M3-1.5.7e\1.5.7e\bios\recovery

 

c220 m3 huu download site

https://software.cisco.com/download/release.html?mdfid=284296253&softwareid=283850974&release=2.0%283i%29&relind=AVAILABLE&rellifecycle=&reltype=latest


Let me know if this helps

View solution in original post

2 REPLIES 2
Walter Dey
Advocate

Sorry, can you please clarify ! what is your problem / question ?

Manuel Velasco
Cisco Employee

Hi Jalen,

If your server keeps looping at the configuration screen most likely the bios is corrupted and you need to recover it.

See the documentation to help you recover the corrupted BIOS. I would suggest that you try procedure 2.

Using the BIOS Recovery Header J41

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220/install/C220/install.html#pgfId-1416982

 

To get the recovery.cap file you need to download the HUU of the current version installed on your server (you can find this version from the cimc) and extract the iso.   For example for the HUU version 1.5(7e) the recover file is located in the following location

ucs-c220-huu-1.5.7e\C220M3-1.5.7e\1.5.7e\bios\recovery

 

c220 m3 huu download site

https://software.cisco.com/download/release.html?mdfid=284296253&softwareid=283850974&release=2.0%283i%29&relind=AVAILABLE&rellifecycle=&reltype=latest


Let me know if this helps

View solution in original post

Content for Community-Ad