I've got a weird issue with both of my C220 M5SX servers.
I powered down my complete home lab to physically move/roll the rack 10metres across the room to a better spot, and now they are failing to power on/post.
They are UCS managed and hooked directly to 6234 interconnects, and everything was cleanly shut down before power was removed. (ie, VMs, Hosts...etc).
Everything else has come back fine including the 5108/B200M4 setup, switches, PDUs, UPS's...etc, just not the C220 M5s.
UCS Manager is giving a failed to power on type error, and the servers themselves are having an amber power light with all SAS SSD drives lights being red and the fans running full speed.
I pulled one server to troubleshoot better and from what i can see upon applying power the CIMC does its normal checks and all lights are green, but when hitting the power button the server powers on for 1/2 a second and then back off... pressing the power button 1-2 more times gets the same symptoms as above.
This is unfortunately a home lab so no TAC support, but just wondering if anyone has seen this type of issue before?
Given both servers have been powered off lots of times before without issue, but both now have the exact same problem it just seems very odd.
Our partnership with NetApp is stronger than ever with joint engineering development of the new FlexPod XCS. Introducing a new level of visibility and automation that can help propel your journey to hybrid cloud. The Cisco Intersight™ cloud operations p...
There is a prevalence of network threats across the world, and the rate, at which these threats continue to emerge, is more rapid than ever before. Cisco Next Generation Firepower (CNGFW) security technologies is information security service that provides...
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...
SymptomsCisco Prime is unresponsive. Web GUI will not load. Device doesn't respond to ping.DiagnosisPrime chassis is off.SolutionSince the CIMC uses Flash you can no longer use your bowser. SSH to CIMC address instead. show chassis detailChassis:Powe...
Very first data cloud — Evolution of data lake to hybrid cloud
Today, in this digitized world, data is being generated at a very high rate and from many different sources, and it is growing exponentially in many use ca...