c260 M2 CIMC web interface times out using Shared LOM 10g
I have two new c260 M2 servers with CIMC v1.5 (3d). The CIMC web interface is not accessible if I use the 10gig ethernet connection and specify CIMC to use the Shared LOM 10g with either active-active or active-standby. I'm using static IP address for CIMC. I can ping the CIMC address, but the https connection to it times out. It does work over the dedicated LOM port.
Step by Step Process to Find UCS Drivers and Install on UCS-C series(Rack Servers)
How to find Compatible Drivers:
Use Cisco UCS HCL Tool to Find the Drivers:
Select the options in the drop down as p...
Cisco UCS Platform Emulator, Release 4.2(2aPE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
Our partnership with NetApp is stronger than ever with joint engineering development of the new FlexPod XCS. Introducing a new level of visibility and automation that can help propel your journey to hybrid cloud. The Cisco Intersight™ cloud operations p...
There is a prevalence of network threats across the world, and the rate, at which these threats continue to emerge, is more rapid than ever before. Cisco Next Generation Firepower (CNGFW) security technologies is information security service that provides...
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...