05-26-2016 04:12 AM - edited 03-01-2019 12:45 PM
Hi I am having trouble finding anywhere that will give me a confirmed answer on this.
I would like to know if a C3160 server with a Vic 1227 supports direct connect mode into the FI's.
Many thanks
Solved! Go to Solution.
05-26-2016 05:55 AM
Hi Anthony,
If you reference the spec sheet below:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C3160/install/C3160/ucsm-integration.html
"At this time, the Cisco UCS C3160 server operates in standalone mode only. Cisco UCS integration is not supported."
This means that the C-series server can not be connected to the Fabric Interconnect. Here is a guide over C-Series Server integration:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
"Cisco UCS Manager 2.2 supports an option to connect the C-Series Rack-Mount Server directly to the Fabric Interconnects. You do not need the Fabric Extenders. This option enables Cisco UCS Manager to manage the C-Series Rack-Mount Servers using a single cable for both management traffic and data traffic. "
Since integration is not supported this feature will not be available.
I hope this helps, please mark correct answers so others may find useful posts accurately.
Qiese Dides
05-26-2016 05:55 AM
Hi Anthony,
If you reference the spec sheet below:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C3160/install/C3160/ucsm-integration.html
"At this time, the Cisco UCS C3160 server operates in standalone mode only. Cisco UCS integration is not supported."
This means that the C-series server can not be connected to the Fabric Interconnect. Here is a guide over C-Series Server integration:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
"Cisco UCS Manager 2.2 supports an option to connect the C-Series Rack-Mount Server directly to the Fabric Interconnects. You do not need the Fabric Extenders. This option enables Cisco UCS Manager to manage the C-Series Rack-Mount Servers using a single cable for both management traffic and data traffic. "
Since integration is not supported this feature will not be available.
I hope this helps, please mark correct answers so others may find useful posts accurately.
Qiese Dides
05-26-2016 06:50 AM
Well that clears that up thanks for the information.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide