Can I configure some ports on FI-6200UP GEM as server ports?

[moyeonlee]

Hi,

I need your help!

I know FI-6100 doesn't support to be configured its some port on GEM as server ports.

Is it possible to configure some ports on FI-6200UP GEM as server ports?

And also, I wonder that some ports(1/9-16) on a port group(Second) can be configured as a server port(1/9-10), uplink ethernet port(1/11-12), FCoE port(1/13-14), and FC port(1/15-16).

Thanks in advance.

Paul

[padramas · Accepted solution]

Hello Paul,

Yes, you can configure server ports on Expansion modules on FI 6200 series.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0110.html#concept_A552AD7757A549FB82D16A07D0EDA1E4

--------- snip ------------

All of the port types listed are configurable on both the fixed and expansion module, including server ports, which are not configurable on the 6100 series fabric interconnect expansion module, but are configurable on the 6200 series fabric interconnect expansion module.

----------------------

HTH

Padma