We had our CIMCs configured to use encrypted AD authentication and until we began to update the domain controllers to Server 2012, everything worked fine. Since the 2012 DCs have been introduced, encrypted authentication no longer works. The message "Login failed. Verify that your username and password are correct." is displayed.
The following is found in the CIMC log:
pam_ldap_manager(webgui:account): Can't contact LDAP server, error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol: Please check the correct Certificate Authority (CA) certificate has been uploaded to AVCT. Please also check if the AVCT date is within the valid period of the certificates and the Domain Controller Address configured in AVCT matches the subject of the directory server certificate: firstname.lastname@example.org, host=xxx.xxx.xxx.xxx
This is repeated for each configured DC in the Active Directory Properties tab. Changing the configuration to a 2008R2 DC allows for a successful authentication.
Interestingly, SSH connections are still able to authenicate using AD accounts.
Testing has been done primarliy on a UCS C260M2 (C2188.8.131.52.0), CIMC ver 1.5(1b), AD Domain / Forest functional leve - Windows Server 2008R2, Domain Controllers - Windows Server 2012 Enterprise (Core)
Does anyone have any suggestions on how to get encrypted authenication working against Server 2012 DCs?
Many users of technology in today's workforce are considered "remote workers". We have laptops, tablets, smartphones, etc. that allows us to stay connected if we choose ~96.259% of the time (personal "guestimate" percentage). When you get down to ...
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•This field guide is meant to be used by customers for cleaning up an existing HyperFlex Edge deployment for the purposes of reinstalling.
•The procedures in this guide are DESTRUCTIVE. Make sure all VMs and data are backed up before proceedi...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...