cisco alpine scsi enclosure device

[piston.andriyanto]

we are looking driver for " cisco alpine scsi enclosure device "

Our enviroment are :

C460 M2

Windows server 2003 X64 Enterprise edition R2 SP2

LSI CONTROLLER 9260-8i

Best regards

[padramas]

Hello,

Here is the latest drver ISO image

http://www.cisco.com/cisco/software/release.html?mdfid=283862074&flowid=26802&softwareid=283853158&release=1.4%283a%29&relind=AVAILABLE&rellifecycle=&reltype=latest

Also , as per latest HCL, Windows 2003 is not a supported OS for C460 server

http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html

Can you please share the exact error message or more details about this driver ?

Padma

[piston.andriyanto]

Thank you Padramas,

Yes we already know that Windows 2003 is not a supported OS for C460 server, but our customer dont want to know that.. this is the screenshoot from device manager:

we already download the newest driver but still not found..

Do you any sugestion?

when we enter the web bios (LSI Mega raid) we also found about alpine, is this related ?

thank you

[padramas]

Not having SCSI Enclosure device driver might not break any major functionality.

However, it is strongly recommended to run supported OS and also helps to avail support from TAC.

Padma

[piston.andriyanto]

Hi Padma,

Thank for your answer,

from CIMC SEL we found this critical error :

2012-04-30 02:46:16    critical    System Software event: Post sensor, CPU0 Riser 8 DIMM_1D Memory not configured for selected RAS mode [0xE4FC] was asserted

2012-04-29 19:06:38    critical    CATERR_N: Processor sensor, Predictive Failure asserted was asserted

2012-04-28 16:23:54     critical    FRU_MR2 MEM2_MB_TEMP: Temperature sensor for FRU_MR2, non-recoverable event, Upper Non-Recoverable going high was deasserted

2012-04-28 16:23:52    critical    FRU_MR2 MEM2_MB_TEMP: Temperature sensor for FRU_MR2, failure event, Upper Critical going high (127.0 > 92.0 C) was asserted

what its mean? are this error related to the driver?

thank u

[padramas]

Hello Piston,

CIMC version ?

These errors are not related to SCSI enclosure driver. I would suggest you to open a TAC service request with CIMC show tech log bundle.

It will help us to understand your server configuration and the problem.

Padma