A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-220.127.116.11.iso
Good,I urgently request help, it is a task of my university, I must install the UCS emualator, I have version 4.0, and what the teacher asks is that there are 3 chassis and each one I have blades, and that you can ping a server to another from ssh, please...
I am planning on running an Infra firmware upgrade on my current UCS domain. It's currently 3.2(1b) and we are planning the upgrade to 4.0(4e) so we can make use of some new M5 blades. The M5 blades are going to replace the existing M3 and M4 blades in th...
I am planning an upgrade of my environment - I have 2 domains each consisting of 3 5108 chassis, 6248 FI's, B200 M3 and M4 blades, and one UCS Managed C220-M4S. Currently at 3.2(2f) all running ESXi 6.0 U3. vSphere has been upgraded to 6.7 and I want to u...
Hello All, recently we were discussing current data center infrastructure and it's contracts what will be renewed and whats not.we found that our VNX SAN storage which is connected through Cisco MDSs to the UCS chassis 510...