A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-184.108.40.206.iso
Running UCS 6232 16UP fabric Interconnects with firmware 4.0.2dConnecting a UCS C220 M5SX server with a VIC 1385 card in PCIe slot 1. Direct Attach.Making a policy for the server and attach it.Before attaching the server to FI, I had VMware ESXi 6.7 u2 in...
I have a B200 M4 with a UCSB-VIC-M83-8P that lost its connections all of a sudden. I reacknowledged the blade and all looks good now, but I'm trying to figure out what happened. What kind of action would cause this? I don't expect anyone...
Hi,I've got C220-M4 server located far away in data center. The problem is that I became server owner, however previous owner could not provide credentials to CIMC. So, I've got CIMC IP address but I cannot log-in.Is there any way to reset CIMC passw...
We have cisco UCSC-C220-M4S server running ESXi 5.5U3,now we are going to upgrade Firmware 4.0(2h) , followed by ESXi 6.5 U2 upgrade using below cisco customized image VMware_ESXi_6.5.0_10719125_Custom_Cisco_220.127.116.11_Bundle.zipRelease Date: 2019...
When will the Cisco Custom ISO for ESXi 6.7 U3 Install CD be ready? I've looked on VMware's site and it's not available. Vmware told me to ask Cisco and Cisco told me to ask VMware. I'm going in circles.