A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-188.8.131.52.iso
Hi, Could anyone here please help clarify if I can configure either BIOS or Cisco 12G SAS Raid bios to disable raid? I am having a Cisco C220 M4 server with a Cisco 12G SAS raid controller. I physically rem...
Hi,We are seeing the following error " TCA: etherNiErrStats crcDelta for sys/chassis-2/slot-2/fabric/port-1 , current-value = 5, raised above esc value 5" on 2 of our UCS chassis's. The system details are FI System is 5.0(3)N2)3.12E , ...
Please tell me how to properly configure the ports to connect the Cisco UCS 6248UP and the Cisco UCS-FI-M-6324 [UCS Mini] (so that there is communication both via Ethernet and FC). It is planned to use all 4 ports on 6324!If this connection option is not ...
We're doing our Vsphere 6.7 upgrade, we have a Cisco UCS environment that's currently on 3.2 firmware. what's the latest firmware version we have to upgrade to in order to be compatible with the vsphere 6.7? if anyone can provide a like to suc...
Hello,I just picked up two C200 M1 machines second hand, and have run into an issue. I tested both before I purchased them, and they both POST'd fine so I purchased them. When I got them home I powered up one of them up. It was doing fine but seemed to st...