A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-184.108.40.206.iso
Hi,I received a minor warning on a server displaying CATERR_N:Sensor Failure Asserted.Looking at the SEL log I can see this happening like 1-4 times a year since the server was first initialized but has now occurred multiple times in the last few days. Sh...
I am upgrading our blades from m2 to m5. I put two m5's in and they are not recognized and giving the error f999560.When upgrading do you have to do it in order or can i just get the newest firmware or basic requirements for the blades and start from ther...
Hi all, I inherited a UCS domain that is registered to UCS Central. The WWPN, UID and MAC pools are managed using UCS Central along with the service profile templates. The UCS domain lost-visibility at some point to UCS Central. I need to un-register UCS ...
Hi, I have a customer that implemented DJL2 for a temporary project and DJL2 was setup correctly by placing the VLANs (via lan uplink mgr) on the appropriate uplinks. The environment is 10 chassis 4.0(4b). Currently there is only one port chann...
Hi experts,I have just deployed a Hyperflex cluster that uses the 4 port VIC 1457 interface card. Only two of the ports (1 & 3) are connected to the Fabric Interconnects as per these instructions.But UCS Manager now reports a Major error. T...