A new version of the script is posted below (v3). This version adds additional support for UEFI boot on UCS Rack Servers.
About the Cisco Standalone C-Series Host Update Utility USB Image Utility:
This utility is designed to assist users who want to update firmware on their standalone C-Series server from a USB drive. Specific, this utility will write the HUU ISO image to a bootable USB stick. This USB stick can be used to update firmware on a standalone C-Series server either by changing the boot order or manually selecting the USB device in the <F6> boot menu.
Requirements: - HUU USB Image Utility - Linux Server (Tested with RHEL 6.4 and CENTOS 6.4) - The following package must be installed: syslinux-4.02-8.el6.x86_64 (or later) - Standalone C-Series HUU Image (to be written)
Note: You may need to unmount the drive to properly execute the script. (umount <dev>)
sh create_util_usb_v2.sh <UCSB Device> <file.iso>
OR sh create_util_usb_v2.sh /dev/sdb ucs-c240-huu-18.104.22.168.iso
Hello! According to the release notes of my target CSP version release I need to go to 4.0(4d). I am currently on 3.0(3a) according to the logon splashscreen, and in the Firmware management section.I think the CIMC link provided bellow works for my C...
Hi. we need some help understanding why HX cluster is completely shutdown when we have a failure. Let's say we have a 4 node HX cluster, with RF2. If we remove 2 disks from different nodes, the Cluster is shutdown.We understand that RF2 means 2 copie...
Helloafter upgrading the UCS Central to version 2.0(1j), I can't use the "set-ucscentralserverpower -ServiceProfile $Serviceprofile -State up -Force" command via UCS Central PowerTool.Always get the error:"set-ucscentralserverpower : Config server power s...