01-18-2017 10:48 AM - edited 03-01-2019 01:02 PM
Is QLogic QLE2562 HBA card with part number P/N: PX2810403-01 L compatible with Cisco UCS C220 M3 ?
As the card cannot be read by the bios and when the server detect it, after restart it disappears and so on.
01-18-2017 11:30 AM
Hello,
All supported hardware can be found on the spec sheet:
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/c220m3-sff-specsheet.pdf
Please ensure the option ROM is enabled in the BIOS.
Have you tried different slots? Are you on a correct firmware version to support that card?
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
HTH,
Wes
01-18-2017 03:29 PM
Hello,
I read that document, but every vendor has its own part number or Product ID.
For Cisco the Part number or PID as shown: N2XX-AQPC105
and the card I have is PX2810403-01 which is not a valid cisco PID.
So I need to know, if is that P/N compatible with the ucs or not ?
Thanks.
01-19-2017 04:47 AM
The card will need to be a Cisco branded/approved card.
Many of of our 3rd party approved/tested devices will have firmware enhancements that improve functionality in a UCS server, including power/cooling profile requirements, firmware releases included in HUU/UCSM, etc.
Thanks,
Kirk...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: