cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

636
Views
5
Helpful
2
Replies
SrikanthV
Beginner

Cisco UCS Central SNMP Configuration for Zabbix

Hi,

We are trying to configure Zabbix for Alerting and monitoring of Cisco UCS.

can you guide me on how to do this.?

UCS Central 2.0(1i)

Zabbix version 3.4.

 

Thank you.

2 REPLIES 2
Wes Austin
Cisco Employee

If you are looking for help with Zabbix specifically, you should check out their forum. For UCS configuration, you would just be modifying SNMP configuration per Zabbix instruction.

 

https://www.zabbix.com/forum/zabbix-help/383240-zabbix-monitoring-cisco-ucs 

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Authentication/2-0/b_CiscoUCSCentral_AuthenticationGuide-2-0/b_CiscoUCSCentral_AuthenticationGuide-2-0_chapter_0110.html 

Hello @Wes Austin  and @SrikanthV 

 

I have become a Zabbix convert recently and I was trying to add CIMC to Zabbix via IPMI. I know IPMI is working because I can get output from the ipmitool. But Zabbix ain't playing ball. Anyone had any luck with UCS and Zabbix using IPMI instead of SNMP?

 

root@ZABBIX-01:/home/admin# ipmitool -U zabbix -H 192.168.2.108 -I lanplus -L user -y C53740EFBD7BF20522D1C5DA6529AC851CD5CA47  -A OEM session info all
session handle                : 32
slot count                    : 4
active sessions               : 2
user id                       : 5
privilege level               : USER
session type                  : IPMIv2/RMCP+
channel number                : 0x01
console ip                    : 0.0.0.0
console mac                   : 1c:55:40:c0:70:3d
console port                  : 53305
Content for Community-Ad