Cisco UCS Platform Emulator, Release 2.2(2cPE1), adds support for the following new hardware:
New scalable M4 Blade Module for the UCSC-B260-M4 or UCSC-B460-M4 Blade Server added
New rack-mounted server UCSC-C460-M4 added
Support for the following storage accelerators:
New Software Features
Cisco UCS Platform Emulator, Release 2.2(2cPE1) includes the following new features:
Support for the scriptable vMedia feature to create mount points on Cisco IMC. The mounts are only configured and not actually mounted.
New tab Storage Controller added under Startup Inventory. You can drag and drop the storage controllers on the rack-mounted servers or the blade servers.
You can add the scalable M4 Blade Module in scaled (4S) or non-scaled (2S) mode.
The default configuration is changed to the M3 blade and rack-mounted servers.
NOTE: From UCS PE 2.2(1bPE1) onwards, UCS PE supports uploading the B-Series and C-Series server firmware bundles. Because of the large file sizes of the firmware bundles, UCS PE only supports uploading of only the stripped-down versions (attached to this document), which includes only the firmware metadata but not the actual firmware itself in the binaries. The stripped-down version of the firwmare bundles which contain metadata only of the B-series and C-series server firmware is reduced to approximately 50 kB in size.
The UCS drives I have are firmware A005 since we keep them updated with HUU as recommended. The UCS-C22-M3 requires a 9240-8i for ESXi to be able to be installed. We are trying to find an actual use for it. The 9240-8i requires firmware A001 to be on my d...
I don't manage this system directly, but I'm involved in a project where we have a few C220 M5 with a VIC 1457 mLOM adapter installed.The settings for the "External adapters" is greyed out, and my theory at the moment is that the server has a "default ser...
does anyone know a simple way to export server inventory into a .csv file?ssh# show server versionmy goal is to have a easy to ready csv file with running firmware versionswe dont have intersight show server versionServer 1/1:CIMC:Running-Vers:...
I currently have the primary and secondary DNS servers defined in Unity. I'm wondering if there is a way to set a tertiary DNS server. Has anyone found a way to set a third DNS server? For example something like this:set network dns primary X.X.X.Xse...
Hello, I'm setting up a new UCS chassis with some B200M5 blades VIC1440.Connecting these blades for boot on san on VNX backend worked with no issue and setup of esxi 6.5 worked perfectly. Just facing right now an issue for connecting those blade...