CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported by Cisco TAC. UCSPE backups should only be imported to UCSPE domains.
New Features and Significant Changes in Cisco UCS PE, Release 3.2(3ePE1)
Full scale emulation of UCS Manager 3.2(3e) which supports M5 Hardware. Note that there are limited functional changes from the previous release and not all features present in UCS Manager 3.2(3e) are supported (see Known Limitations).
New default HW config with M5 servers added.
Additional example Hardware configurations have been attached below. The attached UCSPE configs can be imported from the UCSPE Equipment page.
UCSPE is featured in a Cisco dCloud programmability demo. The demo includes a comprehensive lab guide including the following content for the Cisco UCS PowerTool and Python SDK:
Overviews of PowerShell and Python programming environments with step-by-step usage instructions
Code generation examples including code generation with UCS Manager's HTML5 interface
Sample script creation and use with UCSPE
Hardware Feature Summary
Please see the Release Notes for a complete list of supported Hardware. Below is a summary:
M5 and M4 B-Series and C-Series servers including HX220C and HX240C
Cisco UCS S3260 chassis, servers, and storage controllers
NVMe-based PCIe storage options
The Platform Emulator does not support connections to Cisco Intersight to avoid the use of Intersight resources by emulated devices. The Intersight Device Connector has been disabled and the device connector menu in the UI is non-functional. You can use Intersight demo environments in the Cisco demo Cloud (https://dcloud.cisco.com/ ) and Cisco DevNet (https://developer.cisco.com/site/intersight/ ) to explore the Intersight management of UCS.
Imported configurations should be manually checked to ensure there are no missing or unsupported components. If issues are experienced following an import, any unsupported components can be manually deleted and missing components manually added through the Equipment menu on the Navigation pane.
Firmware Management and Firmware Auto Install have not been fully validated in this release.
If issues are experienced during FW download, please try alternate methods such as API based download (e.g., using PowerTool or Python SDK).
If issues are experienced with FW policies, please try excluding all components from the policy.
AAA-based authentication (LDAP, RADIUS, TACACs)— The Platform Emulator accepts security configuration changes, but does not enforce local or remote password authentication. Any username and password combination can successfully log into the Cisco UCS Manger UI with administrator privileges.
See the Release Notes for the complete list of Known Limitations.
IMPORTANT CONFIGURATION NOTE: Backup/Import of UCSM Configuration
The Platform Emulator does not save UCSM configuration state across Emulator resets (to avoid consistency issues in UCSM configuration and the emulator HW configuration). To preserve UCSM state, UCSM backup and import operations can be performed. See an example backup/import flow here: PythonSDK for backup/restore (import) of UCSM config
Firmware Management: UCS PE supports uploading B-Series and C-Series server firmware bundles. Because of the large file sizes of the firmware bundles, UCS PE only supports uploading of stripped-down versions (link below). Stripped-down versions include only the firmware metadata (not the actual firmware binaries).
I've be assigned to on board a small amount of Cisco UCS C220s and C240s onto a new DMZ in our network. I've never really worked with UCS but my main concern is getting the management configured correctly. From my understanding there is a dedicated manage...
Hello all,I have a WLC 5520 where I need to perform the firmware upgrade for the hardware. This server has currently version 4.0.1a and I need to bring it to 4.1.2f. Therefor I use ucs-c220m4-huu-4.1.2f.iso. I have done this multiple times on di...
Hello Community,we bought some new blades and also a new chassie. The chassie is up and running and now i want to add the new blades into it and assign my service profile. But there is one difference between the old ones and the new blade. The new ha...
Hello, I'm trying to import the UCSM MIBs into Zenoss. However facing issue. Any idea what's wrong? Thanks /opt/zenoss/share/mibs/site/cisco/CISCO-UNIFIED-COMPUTING-TC-MIB.my:32: identifier `TEXTUAL-CONVENTION' cannot be import...
Hi Folks, I tried to boot from a USB my server B series. I insert the USB into a KVM dongle an set the policy as below Local FloppyLocal CD/DVDRemote Virtual DriveCIMC Mounted CD/DVDLocal Disk but didn't work.