11-29-2014 10:35 AM - edited 03-01-2019 11:56 AM
Hello Community,
I'm practising with the Cisco UCS Manager Emulator, however I'm having a problem resolving the servers, see image. Can someone let me know where I'm going wrong?
Carlton
cpatte7372
11-29-2014 02:30 PM
I dont use the emulator that much but for what I understand, you need to select your hardware.. did you select the blade you want to use?
That "Needs resolution" usually shows up in the real UCSM when you decomission a blade and you have not removed it.
-Kenny
04-03-2015 09:05 AM
Right click on the blade picture, click on resolve slot issue, there will be a link, click on the link to accept the blade, then you can re-ack the blade
04-03-2015 09:44 AM
Also, you will not be able to re-ack the blade until identifying step is complete. You can watch the progress in FSM. When it reach 100%, the re-ack link will be available for you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: