cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
configure & troubleshoot anyconnect
85
Views
0
Helpful
4
Replies
Beginner

Cluster of Different Server Nodes under same Hyperflex

Is it possible to built cluster of 2 Different Server nodes under the same Hyperflex?

 

For example 3 Server Nodes of HXAF240C-M5SX and 3 Server Nodes of HX-UC-C220M5SX work under same hyperflex?

4 REPLIES 4
Cisco Employee

Re: Cluster of Different Server Nodes under same Hyperflex

You cannot mix those models of servers as converged storage nodes, as they have very different configurations for storage (i.e. 24 drives vs 10.

In later versions, you can mix M4/M5 units within the same line (i.e. 220, 240).

 

Kirk...

Beginner

Re: Cluster of Different Server Nodes under same Hyperflex

Hi,

Thanks for your reply. I didn't mean to converged the storage of 2 Different Nodes model together. I mean to keep both Nodes Cluster (HXAF240C-M5SX) & (HX-UC-C220M5SX) separately from each other under the single Hyperflex domain.

 

I hope this work fine?

 

Hyperflex Version: 3.5(2a)

UCS Version: 4.0 (1C)

 

Highlighted
Cisco Employee

Re: Cluster of Different Server Nodes under same Hyperflex

You can mix 240m4/240m5 or 220m4/220m5 which will have same drive capacity.

You cannot mix 240 and 220s as they are very different configurations.

 

Kirk...

Cisco Employee

Re: Cluster of Different Server Nodes under same Hyperflex


@jahanzaib amin wrote:

Hi,

Thanks for your reply. I didn't mean to converged the storage of 2 Different Nodes model together. I mean to keep both Nodes Cluster (HXAF240C-M5SX) & (HX-UC-C220M5SX) separately from each other under the single Hyperflex domain.


They cannot be in the same HyperFlex domain. You have to create a separate HX cluster, but you can use the same UCS FI's. You can have up to 8 separate HX clusters on a single pair of FI.

CreatePlease to create content