cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
configure & troubleshoot anyconnect
101
Views
5
Helpful
1
Replies
Highlighted
Beginner

Configure FI port as Access port

We need to connect a UCS C220 server in a FI and reach a network. c220 servers 40gb slot are connected to 6332-16up 40 gb port. If I set the port to network uplink. my vms on other servers got lost connection. maybe because if Netwprk uplink configuration by default is in trunk mode. what is the proper way that I can specifically assign a vlan in a port in FI or basically configure it as access port.

Everyone's tags (2)
1 REPLY 1
Cisco Employee

Re: Configure FI port as Access port

FI uplink ports are designed to be trunks.

The only ports I am aware of that can be similar to access are 'appliance' ports.

If you are trying to configure one specific set of ports to go to a specific upstream device/set of vlans, then you just need to correctly configure disjoint layer 2.

See https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/white_paper_c11-692008.html

 

Kirk...

CreatePlease to create content
Content for Community-Ad
June's Community Spotlight Awards