cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
495
Views
0
Helpful
2
Replies

Configuring unified fc ports on 6332-16up

scrussell30
Level 1
Level 1

I'm trying to connect the US FIs to direct attached storage, and when I go into the FIs to configure the fc ports, it's requiring that the storage ports start on the left and go to the right, with the ethernet ports on the right side.  I've set up the fc ports on the right side on older 6248s.  Have they changed this on the 6300 series?

 

This isn't a huge deal, but i would like to keep in step with our previous implementations where the DAS is connected into port 15/16 of the FIs, and the network uplinks in the first 4 ports.

 

Thanks

1 Accepted Solution

Accepted Solutions

Wes Austin
Cisco Employee
Cisco Employee

Yes the ports have changed between models. The FC ports start on the far left and slide to the right.

 

 

View solution in original post

2 Replies 2

Wes Austin
Cisco Employee
Cisco Employee

Yes the ports have changed between models. The FC ports start on the far left and slide to the right.

 

 

I thought so.  Thanks for confirming Wes.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: